Tweet
MHZ Chaparral 51 in long Imported from Germany 1150 Nzd
Plettenberg HP 370 BM/50/A1 S Brushless
Schulze Fut-40.160WK Brushless Esc -- esc & motor brought from Icare in feb this year -- 2240 Nzd
2 X Hyperion Vx G3 5500 Mah 6s 35C -- 1190 Nzd (595 Nzd each)
Hitec HS5745MG 1/4 digital servo -- 130 Nzd
2600 Mah Nimh 6 volt Reciver pack -- 40 Nzd
Speedmaster Mono Strutt & twin water pickup rudder -- 150 Nzd
1/4 flex cable, Hardened 1/4 propshaft machined to 3/16,drive dog, thrust washers,bullet,2 X Octura props X455 X457 (only been run with X455) 100 Nzd
Total of 5000 Nzd
This boat has been run four times
Second run it did over 60 mph but the boat was wild i thought the Cog was at 33% but after checking it was just over 29% the batt where sitting on each side of the rails now the batt sit in a custom made carbon tray between the rails in the bottom of the V cog can be set from 30 to 37% and the batt sit much lower in the hull
I have lost all Interest in the boat hobby and really enjoying my rc flying so i have to part with it, the hull is unmarked absolutely no cracks in the gelcote , everything is in as new condition,batt have only been charged & balanced four times with my Hyperion chargers last charge was done in storage mode
The total price above doesn’t include the price of water inlets outlets silicone tubing rubber boot stuffing tube SS bolts etc
Just add your RX & TX and run
2500 Nzd firm Buyer to pay for Shipping & Insurance
More pics & Vid on this forum
http://forums.offshoreelectrics.com/...ead.php?t=6924
Adrian
Plettenberg HP 370 BM/50/A1 S Brushless
Schulze Fut-40.160WK Brushless Esc -- esc & motor brought from Icare in feb this year -- 2240 Nzd
2 X Hyperion Vx G3 5500 Mah 6s 35C -- 1190 Nzd (595 Nzd each)
Hitec HS5745MG 1/4 digital servo -- 130 Nzd
2600 Mah Nimh 6 volt Reciver pack -- 40 Nzd
Speedmaster Mono Strutt & twin water pickup rudder -- 150 Nzd
1/4 flex cable, Hardened 1/4 propshaft machined to 3/16,drive dog, thrust washers,bullet,2 X Octura props X455 X457 (only been run with X455) 100 Nzd
Total of 5000 Nzd
This boat has been run four times
Second run it did over 60 mph but the boat was wild i thought the Cog was at 33% but after checking it was just over 29% the batt where sitting on each side of the rails now the batt sit in a custom made carbon tray between the rails in the bottom of the V cog can be set from 30 to 37% and the batt sit much lower in the hull
I have lost all Interest in the boat hobby and really enjoying my rc flying so i have to part with it, the hull is unmarked absolutely no cracks in the gelcote , everything is in as new condition,batt have only been charged & balanced four times with my Hyperion chargers last charge was done in storage mode
The total price above doesn’t include the price of water inlets outlets silicone tubing rubber boot stuffing tube SS bolts etc
Just add your RX & TX and run
2500 Nzd firm Buyer to pay for Shipping & Insurance
More pics & Vid on this forum
http://forums.offshoreelectrics.com/...ead.php?t=6924
Adrian
Comment