Tweet
This is a great test tool to find how many amps your system is drawing or testing cells and much, much more. It connects between the battery pack and load to measure volts, amps, watts and amp hours.
Measures 8 parameters key to electric power safety & performance, typical applications:
* to prevent peak currents damaging battery, motor control, motors, wiring and connectors.
* Verify sufficient operating voltage under load.
* Set cutoff voltages, check battery capacity & health.
* Balance battery cells.
* Confirm proper battery charger operation.
* Detect receivers and actual operating current so as to make sure whether an UBEC is needed.
Captures MAX values until you disconnect from battery, comes with 5.5 bullets soldered on each end. Served me well this season, but I am moving up to an EagleTree system for data logging.
20151215_202313.jpg
Measures 8 parameters key to electric power safety & performance, typical applications:
* to prevent peak currents damaging battery, motor control, motors, wiring and connectors.
* Verify sufficient operating voltage under load.
* Set cutoff voltages, check battery capacity & health.
* Balance battery cells.
* Confirm proper battery charger operation.
* Detect receivers and actual operating current so as to make sure whether an UBEC is needed.
Captures MAX values until you disconnect from battery, comes with 5.5 bullets soldered on each end. Served me well this season, but I am moving up to an EagleTree system for data logging.
20151215_202313.jpg
I be really happy to take it!!
Comment