Various Parts

[egneg]

Here are a few things I can give to folks.

1. KB45 w/water jacket and new bearings - KV unkown.
2. 1S -6S lipo voltage checker - total plus each cell.
3. 540 size silicone water jacket.
4. KOS rudder and servo rods (I got this used and it was shortened to much and will need to be plugged on the bottom).
5. Motor mount - adjustable angle.
6. Venom CNC 32mm left hand prop.
7. UL-1 strut and bushing.
8. Pair of combo turn fin/trim tabs.
9. Standard servo.
10. .187 cable with 3/16 stub x 8.75".

Recipient pays for shipping.

S5000453.JPG

[monojeff]

Here are a few things I can give to folks.

1. KB45 w/water jacket and new bearings - KV unkown.
2. 1S -6S lipo voltage checker - total plus each cell.
3. 540 size silicone water jacket.
4. KOS rudder and servo rods (I got this used and it was shortened to much and will need to be plugged on the bottom).
5. Motor mount - adjustable angle.
6. Venom CNC 32mm left hand prop.
7. UL-1 strut and bushing.
8. Pair of combo turn fin/trim tabs.
9. Standard servo.
10. .187 cable with 3/16 stub x 8.75".

Recipient pays for shipping.

[ATTACH=CONFIG]65226[/ATTACH]

Just to clear up any questions are you giving these away as a lot??

[egneg]

Sorry for any confusion. When I posted the items I didn't know about the one item per person rule

[tagasagwan]

Hi Chuck!

I have a ekos cat project. I would lile to take your gifts as a lot if it's allright? I bought a ekos cat bare hull and still have nothing to put in it. Will the rudder still work even if it has been shortened? Also, good thing you're giving away a prop. I just need to find a right turn prop to match the one you're giving away. Your gifts will be a great help to my ekos project. Let me know how much is the shipping to Las Vegas , NV. 89131. My cousin there is coming to Manila on the 23rd I think. She can bring it in for me.Thanks!

Stephen

[egneg]

Hi Stephen, the rudder is for the full size gas version not the smaller electric cat but may fit. If you still want the lot let me know a medium flat rate box will be $11.00 usd.

[tagasagwan]

Hi Chuck,

If you think it will fit then I think it will. hehehe! PM me you're paypal addy. I'll PM you also my cousin's address in vegas. Thanks a lot mate! Merry Christmas!

Stephen

[larryrose11]

I could use the water pick ups, and the motor, if ya break it up.

[donf]

I could use #7 ul1 strut and bushing let me know thanks dons shipped to ontario canada k7v3z4 and i know there a cost to it

[egneg]

The whole lot will be going to Stephen.

[tagasagwan]

Hi Chuck,

Thanks for the items. I told my cousin in Vegas that its coming. Merry Christmas to you and the whole family!

Stephen

[tagasagwan]

Hi Chuck,

The items arrived yesterday! Thanks again mate!

Stephen