Old Dominion Model Boat Association- Chesapeake, VA

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • egneg
    Fast Electric Addict!
    • Feb 2008
    • 4670

    #16
    Well Mike the mono smoked another speedy at lap 3 1st heat but was running with the pack until then. Mike L was there and I must say that his P-spec tunnel ran great! He jumped the start in the first heat (by about a 1/2 second) and was a lap behind but still came in first! The second heat he had a good start and finished 1 lap up on the nitro guys. I talked to him about getting one of those bad boys for next winters build. He was a lot of help about what hardware to use and where to get it. I had to leave early so didn't see the 3rd heat.
    IMPBA 20481S D-12

    Comment

    • Chilli
      Fast Electric Addict!
      • Jan 2008
      • 3070

      #17
      Thanks for the report Chuck. Sorry you smoked another controller. Were you using the 642? Conditions must of been tough with the winds. They were really whipping up here all day. I got to check out my WS30 yesterday. Sweet! I couldnt believe how light it was. The good news is it comes with a full length box to put everything in. Unfortunately for me, the boat includes the bulkheads but they are not installed and I have no idea where they should be installed. I'll figure it out. Were you and Mike the only ones running FE's this weekend?
      Mike Chirillo
      www.capitolrcmodelboats.com

      Comment

      • cybercrxt
        Fast Electric Addict!
        • Mar 2009
        • 2909

        #18
        Yeah, we were the only ones running FE. Thegreat1 was there, but didn't run anything. Had a good time tho, I know that! Mike
        Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

        Comment

        • Chilli
          Fast Electric Addict!
          • Jan 2008
          • 3070

          #19
          Okay Mike, Good luck in Greensboro this weekend. I take it you'll be the only FE running this weekend. Give the nitro guys hell. Take a copy of FE/Nitro rules because something tells me the CD's havent read them. I did offer a copy to Mudbug via PM on Jims but did not get a response back.
          Mike Chirillo
          www.capitolrcmodelboats.com

          Comment

          • cybercrxt
            Fast Electric Addict!
            • Mar 2009
            • 2909

            #20
            Well, Dick will be there, I will not be making it. I am going to find out tomorrow if I have a job come Monday or not, so I think its probably a good idea to be at work tomorrow. Once this situation is over tomorrow, I think things will be good for a while, if I make the cut that is! Mike
            Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

            Comment

            • Chilli
              Fast Electric Addict!
              • Jan 2008
              • 3070

              #21
              Sorry to hear that Mike. Hope all goes well for you. I figured Dick would be running his B-nitro this weekend like he does at the OD races.

              When ever you get time, I would appreciate any pics you may have of how to do the steering servo/linkage set up on your tunnels. Also, verify you and Dick are running the OS lower unit on the smaller Woodstuffs? Where can I get the FE motor adapter for the OS? This is build number six for me but I'm in the dark when it comes to tunnels.

              Chilli
              Mike Chirillo
              www.capitolrcmodelboats.com

              Comment

              • cybercrxt
                Fast Electric Addict!
                • Mar 2009
                • 2909

                #22
                Chili, take a look at my current build thread. Should give you some ideas for steering arms. They are 4-40 rods. I usually put carbon hollow rod on the outside of the long runs to help stiffen it. Just have not done that yet! The stand off is one I make, and Kris Flynn makes a really nice stand off. And I run OS lowers on my 28" Woodstuffand this 30" and I run the Lawless 7.5 on my 36" Woodstuff and there will be one on my 40" SAW 10s Woodstuff tunnel build that is coming up. Mike

                http://forums.offshoreelectrics.com/...ad.php?t=14487
                Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

                Comment

                • Chilli
                  Fast Electric Addict!
                  • Jan 2008
                  • 3070

                  #23
                  When is the next club race Chuck?
                  Mike Chirillo
                  www.capitolrcmodelboats.com

                  Comment

                  • egneg
                    Fast Electric Addict!
                    • Feb 2008
                    • 4670

                    #24
                    Next Sunday, 7/11/10. I hope to make this one as I missed the last club race.
                    IMPBA 20481S D-12

                    Comment

                    • D&D
                      Senior Member
                      • Aug 2009
                      • 185

                      #25
                      When is the next IMBPA race at the Old Dominion Clubsite? I used to come to the races there when I belonged to the Capitol R/Cers.

                      Cybercrxt, I live in Sanford, NC (in the Carolina Trace) we have an excellent lake, but only electric boats are allowed. Maybe you or a group of electric boaters would like to come down sometime just to run and compare boats. There are some flyers here and one boater with an Acqucraft electric boat.

                      Comment

                      • Chilli
                        Fast Electric Addict!
                        • Jan 2008
                        • 3070

                        #26
                        Dennis, It's the last weekend in August at Indian River High School in Chesapeake. During the Capitol race, George Anastasi told me stories about you and your buddy that owned the gas station in Burke and how your boats kicked A$$.

                        Give em hell next weekend Chuck. Let me know when the following one is. I may come down for a tune up before the D12 race.


                        Mike
                        Last edited by Chilli; 07-05-2010, 12:45 PM.
                        Mike Chirillo
                        www.capitolrcmodelboats.com

                        Comment

                        • D&D
                          Senior Member
                          • Aug 2009
                          • 185

                          #27
                          Nautiboyz, So Captain George is still running - hope he has finally retired. My wife and I are still planning to attend the Chesapeake race to see whats going on.

                          We are having a "Lake Fest" here in the Carolina Trace on Labor Day in Septemer. I may be looking for a boater or boaters to come down and put on demonstrations at Lake Fest. Maybe even one "nitro boat", like someone in the 100mph club....

                          Comment

                          • egneg
                            Fast Electric Addict!
                            • Feb 2008
                            • 4670

                            #28
                            Originally posted by Nautiboyz
                            Give em hell next weekend Chuck. Let me know when the following one is. I may come down for a tune up before the D12 race.


                            Mike
                            The next club race is 8/1/10, it would be great to see you if you can make it.
                            IMPBA 20481S D-12

                            Comment

                            • Chilli
                              Fast Electric Addict!
                              • Jan 2008
                              • 3070

                              #29
                              I'll check the calandar Chuck. I may do that.

                              How many heats do you all usually run per class? What time do you start and finish up?
                              Mike Chirillo
                              www.capitolrcmodelboats.com

                              Comment

                              • egneg
                                Fast Electric Addict!
                                • Feb 2008
                                • 4670

                                #30
                                We usually run 3 heats. Open water is at 10 and hopefully racing starts at 11. If everything goes well we are packing up to go home at 5.
                                IMPBA 20481S D-12

                                Comment

                                Working...