MMEU Night at Larry's 12-17-13

[Shooter]

So does this mean you are getting a buggy Terry? Spence, Tony, and I were having a blast with them (until I broke mine).

Mike - I'm staying old school for now. Found some parts on ebay. The car is probably older than half the kids that work there, but it was keeping up.

[T.S.Davis]

I have an RC10 Team buggy I bought in 1991. Aluminum tub.

I also have Big Bear with a solid steel bumper and a beetle body. That's from 1983 maybe. Great big marshmallow tires.

OH! There's a 4 wheel drive buggy from the 80's too. Called the Gallop I think. I have the same car in front wheel drive. Weird to drive.

[T.S.Davis]

I would like to have a newer buggy just to turn laps with. I can't be racing. I'm like a heroin addict.

What is the car of choice if you want to point and shoot? Do I need 4 wheel drive?

[Shooter]

Most of the guys run 2wd. Associated B4, Losi 22, and the DEX buggy are pretty popular there.

Sounds like your stuff is as ancient as mine. 80's, 90's. 1991 was the year the Worlds were held over on Metro PKWY. Larry still has the shirt from one of the drivers from Japan!

[T.S.Davis]

I ran on that track at Freedom Hill.

[longballlumber]

Terry,

You can find some good deals on rolling chassis on www.rctech.net Those guys are buying and selling stuff more often than I/we do...

Look for a used B4.1. They are discontinued since they have the B4.2 out, but I am pretty sure most of the parts are interchangeable...

Later,
Mike

[T.S.Davis]

15 pages since yesterday. Yikes.

[teetriple]

Look at the losi 22.1 buggys there is alot of them for sale cause of the new 22.2 and the nice thing about the 22's is it can be set up mid motor or rear motor. Even the new in the box 22.1 can be found in $170 range your Slash I am sure would work pretty good with the low cg chassis and the right tires the chassis is aTraxxas part there $40 not a bad price

[T.S.Davis]

Slash

Hate it. Evil POS. Cars as a bad as boats. They all work. You just have to deal with what ever quirk comes with each one.

Does the Losi allow mid motor right out of the box?

Digging around I noticed there is a kit to convert an Associated B2.2 to mid motor. I also saw a mid motor Schumacher. Sweet looking ride but probably parts would be a bugger to get after I crash it. You know me. I'll probably hit the culvert all the way from Larry's

Glad you chimed in Tony. I only own a couple motors 2s friendly. Can I use a 5000kv motor with the right pinion? One less thing to buy.

It's funny to me................$280 for a boat speedo? Bring it! But spring for a Tekin?......hey ho wait a second that's a lot of dough for a toy.

[teetriple]

Terry the losi can be mid or rear motor right out of the kit all the parts come with it I think 5000kv motor is going to be to much I am running tekin 17.5 and it's only a 2400kv motor and it rips pretty good

[T.S.Davis]

haha Maybe I should put a AQ2030 in there.

The Losi might be the cheapest route to spin some laps. I just want something I can point and shoot and maybe work the throttle to keep from exploding it into the wall.

At least with the Losi the parts would be cheapish.

[Shooter]

If you are starting fresh, definitely get the 'custom works' tires they sell at Larry's. They work really well for that surface.

[T.S.Davis]

Picked up a lowering kit for the slash. Also found a Losing for 100 less than Larry's.

[teetriple]

Did you pick up the Traxxas one ? change the shock oil to 30 wt to start set the camber on all four wheels to 1.5 degrees neg set the ride hight to rear drive shafts level and front arms level try a clay tire something like barcodes this should be a good starting point

[T.S.Davis]

Yes I did. Thanks Tony.

I guess I'll need tires and a speedo for the losing too. I'll try the 5000 basic with an witty bitty pinion.