Run day reports.

[bill34207]

Nice come from behind Bill. What is your setup? I run a DF33 but, want to try a Pursuit hull. I've run a 1521 1.5D Neu and a 4092-2200kv Fighter Cat. Going back to the NEU.

I'm using a Neu 1521/1Y that was originally in my old Genesis. It's really a 6s motor but can spin the X646/3 that's on it for around 10 laps without getting anything hot. Not real fast but it's pretty reliable.

[ray schrauwen]

Cool, nice to know.. U think you can do 4 minutes of P-offshore with that? Seems like a good kv for it.

I'm using a Neu 1521/1Y that was originally in my old Genesis. It's really a 6s motor but can spin the X646/3 that's on it for around 10 laps without getting anything hot. Not real fast but it's pretty reliable.

[bill34207]

We don't really have a P offshore class in our club, but it is capable of running the 4 minutes. It's been a while back but threw it in with the LSO guys one day just to see.

[bill34207]

5/25/14

Our normal 2nd Sunday test n tune run was cancelled since it fell on Mother's Day. We did have a little turnout today though even though it's Memorial Day weekend.
The water was very flat at Ackerman for a change but the air was so thick a person could hardly breathe. Summer is here.

1st video today is Ron's 10th scale Executone Hydro.

http://youtu.be/tSoq5s2LwMM

[bill34207]

Next up, Chris' newly finished DF Vortex hydro on it's maiden.

http://youtu.be/36x33zC0VOc

[bill34207]

Another short round with my Avenger twin. HET 700-68-1500 motors. Still not getting enough water flow. I'm going to have to break down and add some thru hull pickups. At least I didn't toast a motor this time.
Thanks Dave, for running the camera.

http://youtu.be/_72O9bQ3UMQ

[bill34207]

Ron's Whiplash LSH that he bought from Mike H.
Since Ron lives in Mississippi we don't see him down here very often.

http://youtu.be/iHMGzn-FGiw

[bill34207]

Brian's new Blackjack in the water with Ron's Miss Geico.

http://youtu.be/GISBONADvJA

[bill34207]

Ron's Jersey Skiff. This one actually completed the run and made it back to shore under it's own power.

http://youtu.be/copS0hZjxR0

[bill34207]

Last one today. Ron's 10th scale shovelnose hydro. The wire drive for it is somewhere on the bottom of the lake.

http://youtu.be/C04pOo7gzyE

[flraptor07]

Hey Bill, my new Hydro is a Delta Force Vortex 34, not a Phil Thomas.

[ron1950]

just build a lexan case around the drivers cockpit it will be water prof now...a lot harder to do the exaust pipes....now guess what...I broke the collet tightening it up...cant get the end off the shaft...going to hughs tomorrow to use a gear puller he has and see if he has any 130 collets....motor change in the geigo also and changed the esc out of the executone

[bill34207]

Hey Bill, my new Hydro is a Delta Force Vortex 34, not a Phil Thomas.

Oops. My bad. Looks a lot like a PT on the water though.

[bill34207]

6/8/2014

Today sure does feel like summer here in Florida. We were fortunate and had a mild NNW breeze going on early in the morning but by the time we were packing up to leave it was dead calm and steamy.

1st up today: More testing with the Avenger twin. Running a CR set of Octura X447's with a couple more degrees of positive angle in the stingers. Maybe a little too much positive....
Thanks Dave, for running the camera.

http://youtu.be/v13Acw9jvUw

[bill34207]

Next up Rick's (rdracrer) nicely painted DF 33 on it's maiden voyage. Looks way too nice for bashing in a P mono race.

http://youtu.be/H0PEmex3444