NEW Florida Fast Electric Club

[tiqueman]

3s or 6?

[RayR]

hey ray what motor do u run in your proboat hydro and if its not a leopard what leopard is the equivelent motor if they make one lol//////...just looked it up....does a 5692 1090kv on 8s sound like enough motor for a pb hydro?

Ron,

I'm running a Leopard 5692/ 730kv on 10S. Tried a 1090kv on 8S, way too hot because the boat is so heavy. I would recommend a Castle 2028 on 10S.

[RCKong]

If you can use the funds right away go ahead and ship it to me. will $28 as a gift do it?

[obrien]

the packs are 6s

Kong, you can paypal to [email protected]

I will get it out on tuesday unless you will be in sarasota on sat. I will be down in the pits at the offshore race all day.

[bill34207]

Ron,

I'm running a Leopard 5692/ 730kv on 10S. Tried a 1090kv on 8S, way too hot because the boat is so heavy. I would recommend a Castle 2028 on 10S.

I was thinking the same for power with a 2028 but would probably stop at 9s 2p. My RCG buddy scorpion1 has already let the magic smoke out of his Hydra Ice 200 trying to run 10s.

[tiqueman]

the packs are 6s

Let me see what I can come up with, and Im interested in two. If you list them or get another offer, no big deal.


RCK, are you coming tomorrow? I know Lawson is, just wonderin if you were in touch w/ him.

Chris will be there and my neighbor, whos name is also Chris, will be there w/ his new twin BJ26. Hopefully Bill makes it before we leave. I gotta be outts there by 1pm.

Chris, did you have a piece of aluminum for the transom of the rescue boat?

[RCKong]

I wish I could... I'm going to try to make it up on the 10th

[tiqueman]

Bummer, see you on the 10th.

[osprey21]

Chris, did you have a piece of aluminum for the transom of the rescue boat?

No - if you have a piece, 3/4" wide or less bring it along and we can drill and attach it at the pond. I'll bring my battery drill and some bits. Also, if you have a set of small metric nut drivers would you please bring them as well? I have a loose turn fin bracket and can't reach it with what I have.

[bill34207]

I thought the rain was supposed to be done yesterday. It's pouring at my house right now.

[osprey21]

It's all moving off to the southeast - should be past us shortly.

[tiqueman]

I'm at ackerman now. Its clear.

[bill34207]

I'm at ackerman now. Its clear.

I'll load up and head that way then. Flying got scrubbed due to rain.

[ron1950]

rain? what the hell is that.......we are 9 inches low and havent seen rain in months in mississippi...wish i was down there again

btw if anyone is interested in converting a 1/8 hydro like rays here is one on ebay http://cgi.ebay.com/RC-Boat-ProBoat-...item35b35226e6

[bill34207]

rain? what the hell is that.......we are 9 inches low and havent seen rain in months in mississippi...wish i was down there again

We were way behind on rain too until last week. Don't think we got a drop in April or May. We're about caught up now though. Don't know where the :sinking guy: went but he'd be a good emoticon for around here right now. :D


Hey Hugh... is that VS1 I bought from you by chance hippies old boat? It runs pretty good considering all I did was drop a motor & esc in it. Setup on it is pretty darn close I think.