Wasn't really what I had planned but this thing runs pretty darned well on a limited system. I'll have to see if I can survive a heat with it.At only 26" it might be tough.
Nice.
I've been tempted so many times to get one of these.
There's a guy that runs one at our club, stock standard. I am surprised at how well the little turn fin, that comes with it, works. Although I'm sure that's not the one on yours eh!
Did you try the 3660 2070kv motor that comes with it for a comparison with your P Limited motors?
I thought it was 28" long?? I could be wrong. Looks just like my old one I sold from HOR.
Did you have one too? I got one from Ron 1950 and I have the TP Power Motor 3630 10D-2100kv motor. Mine has different internal lay out but the hull seems to ride really nicely.
This was a bare hull from TFL so no stock anything. Came with a 4mm strut that's really slick but I didn't use. I don't own a single 4mm prop.
It's got the new fin that Tom (Amp Eater) is having TFL make for him. It's pretty huge for the boats size. Turns on a dime. I built it for N2 but thought I would try it in limited fer grins. It really runs well but it's just not enough boat at 26.5". Lateral waves are tough to negotiate. If you lead you're good. If you follow you're going over. I'm sure it will be more forgiving with other boats the same size. Smaller chop to deal with.
Barrel rolled it three times before finally putting it up side down in the last heat this past Sunday. Then it got hit in the hind end. Hardware is all wang'd now. Fixable.
Comment