DF-35 on the lake.....caution a lil language sorry.

[straitline]

http://youtu.be/ZNYkLRKPx9M

[lenny]

Hi,
Good to see you found the right hole this time for the video's.
Remember the pictures go into the top hole,
But I guess it all depends on what side is up at the time.

So what S cells are you using and what is the setup and prop that you are running ?

[AustinWolv]

Looks like a nice location too.

[straitline]

This was on 4s with a Leo 4082 2200kv motor with a x447 prop. I was at the end of my battery thats why the vid was short.

[lenny]

You should give a x447/3 a try,
But do a test run for a minute or two first and check you temps.
I am using a 4074 1800kv, Esc sk 180a and using 4s,5s,6s in my Pursuit with a x447/3,
And it runs nice and smooth and cool with it.
But I like to use three blade props on all my mono,
I think when the boat is setup right and than you add the right three bladed prop it is like the cherry on top.

[straitline]

I will give that a try maybe it will stop some of my torque roll issues. Thanks for the advise.

[lenny]

That is one of the reasons I like to use them,
I think in my testing that they help a lot with torque roll.
I started using them first on my modded Rio ep to brushless,
It runs pretty good on 2s at 32 mph and 3s at best 44.1 and than it needs wings.