Pursuit testing, I like the hull.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lenny
    Fast Electric Addict!
    • Sep 2010
    • 4294

    #1

    Pursuit testing, I like the hull.


    Some video's of my Pursuit testing with a 4074 1800kv and 447/3 prop on 4s,
    Love how this hull handle all water conditions.
    Next testing today I will raise the strut 3/16" and see how the hull likes it,
    Also will be testing it out on 5s today.




    Some runs from today 07/07/13,
    And it ran a little looser but I did not move the tabs yet just move the cells a little.
    Also no 5s it was just to hot to be running with out some shade around.



    Last edited by lenny; 07-07-2013, 11:46 PM.
    ? ONLY IF THEY WORK

    My youtube videos.http://www.youtube.com/user/61manx?feature=mhee
  • SSchevy98
    Member
    • Sep 2012
    • 90

    #2
    Where's videos?
    Deltaforce 33" cyberstorm 8s Lehner 2250/9 1315 kv/ Leopard 4082 1250 kv .

    Comment

    • lenny
      Fast Electric Addict!
      • Sep 2010
      • 4294

      #3
      They should be on the page.
      No ?


      Sorry these video's that I just took suck !
      I loaded them up with out looking at them first and they are pretty bad to me,
      Sorry about that and I will not do that again.
      Last edited by lenny; 07-09-2013, 06:43 PM.
      ? ONLY IF THEY WORK

      My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

      Comment

      • SSchevy98
        Member
        • Sep 2012
        • 90

        #4
        How do you shield the receiver from water?
        Deltaforce 33" cyberstorm 8s Lehner 2250/9 1315 kv/ Leopard 4082 1250 kv .

        Comment

        • lenny
          Fast Electric Addict!
          • Sep 2010
          • 4294

          #5
          I use surgical gloves fingers,
          And I also use water proof spray to coat the rx's.
          But I only tested one so far and it work very good to,
          I just have not done the rest of them yet.
          ? ONLY IF THEY WORK

          My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

          Comment

          • skeeler
            Senior Member
            • Jul 2007
            • 198

            #6
            Do you still recommend the Pursuit hull? Who makes it?
            Revolt 30, River Jet, Southampton Tug, Outcast 6S BLX, 8ight-E, Ten-SCBE, 22 2.0.
            '09 Miata.
            Ibanez basses and guitars. Mapex drums, Zildjian cymbals.

            Comment

            • ron1950
              Fast Electric Addict!
              • Aug 2010
              • 3024

              #7
              i know i recomend it...steven sells it in the stickies in for sale thread at the top his are rtr.....just a bare hull here http://www.horracing.com/index.php?c...9sh366urqt84d4 and there are others u have to look around some oh ya hobbyking sells them also
              MY RETIREMENT PLAN?????.....POWERBALL
              74 vintage kirby clasic hydro, pursuit mono, mg, 47'' mono, popeye hydro...

              Comment

              • lenny
                Fast Electric Addict!
                • Sep 2010
                • 4294

                #8
                Yes it is still keeping me smiling the more I test and run it,
                On 5s it really comes alive.
                I still need to tweak it in a little more for running it in heaver chop.

                ? ONLY IF THEY WORK

                My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

                Comment

                • skeeler
                  Senior Member
                  • Jul 2007
                  • 198

                  #9
                  Thank you both for your replies. Can either of you compare this boat with the Revolt 30? That's the other model I'm considering.
                  Revolt 30, River Jet, Southampton Tug, Outcast 6S BLX, 8ight-E, Ten-SCBE, 22 2.0.
                  '09 Miata.
                  Ibanez basses and guitars. Mapex drums, Zildjian cymbals.

                  Comment

                  Working...