34" Mono by SpeedCraft Boats

[Chilli]

Those Speedcraft's are as pretty as they were fast. I'll consider having Rick do the paint if he is willing. Do me a favor and keep Norman and Smock separated. Those guys are a bad influence on each other....

[DJGS1]

Those Speedcraft's are as pretty as they were fast. I'll consider having Rick do the paint if he is willing. Do me a favor and keep Norman and Smock separated. Those guys are a bad influence on each other....

It sure is a quick little boat. I'll do my best with Doug & Norman, they're practically inseparable

[Doug Smock]

Holy cow P-Mono is going to be epic in D13 next year!

Chris

Chris hit the nail on the head. The heat is on!!

[HOTWATER]

Chris hit the nail on the head. The heat is on!!

Hi there Doug! Yes he did!...and I'm definately in!! Pretty good report from Chilli about these last week at your D.13 race!!

[DJGS1]

Those SpeedCraft P's took the top 4 in the Grand Prix. Results

[Chilli]

Rub my nose in it why don't you....

[Chilli]

Hey Doug, I'm starting the interior work on the Speedcraft. What length do you like from the shaft side of the motor face to the transom (measured from the inside)? I'll be using a Insane FE mount mounted to some 1/8 ply with blind nuts, then epoxied into the hull. Going to do this build a little arse backwards. Will mount all the interior stuff while I wait for a new Road Runner sponson to be built. Then I'll send everything to paint before I mount the transom hardware.

Word on the street is John Finch got his hands on a certain green Rico Mono to race in D12 next year.

[HOTWATER]

Word on the street is John Finch got his hands on a

certain green Rico Mono to race in D12 next year.

Hmmmm......

[Doug Smock]

Mike,
With the motor sitting at the correct angle it's 5-7/8" from the inside of the transom to the top of the motor.

Sold off your mono Kent?

[Chilli]

He tapped out when I told him I purchased a Speedcraft. LOL Seriously, he's working on a new project. I think I'm more excited about it than he is. I'll let him elaborate.

Thanks for the info Doug.

[Doug Smock]

He tapped out when I told him I purchased a Speedcraft. LOL

Good luck with the build Mike.

[HOTWATER]

Very sad to let it go guys...but yes, $ will be good
for my new project!

Btw...this new Speedcraft mono is VERY cool...can't wait to see Chilli's run (I can pit for you now Mike!!)

-Kent

[Doug Smock]

Good luck with the new project Kent!

[Chilli]

Thanks Doug. As you know I've had rotten luck with the P-Mono's. This one looks like a winner out of the box. Prepare to do battle in July..

Kent, You can pit for me any time. Looking forward to seeing the new boat.

[HOTWATER]

Thanks Doug and Chilli! Thanks for the setup tips you both have given me! Hopefully this setup will be as good as the Rico was...right Doug??! ; )