My Aquacraft Motley Crew

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ringo650r
    Junior Member
    • Aug 2012
    • 22

    #1

    My Aquacraft Motley Crew

  • Make-a-Wake
    FE Rules!
    • Nov 2009
    • 5557

    #2
    Gosh, beautiful scenery.......................boat looks awesome too, setup?
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

    Comment

    • ringo650r
      Junior Member
      • Aug 2012
      • 22

      #3
      Thanks! setup is a leo 4082 2200kv seaking 180 and a octura x447 and 45c 6s

      Comment

      • Make-a-Wake
        FE Rules!
        • Nov 2009
        • 5557

        #4
        Wow..............big stuff for a T180.
        NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

        Comment

        • ringo650r
          Junior Member
          • Aug 2012
          • 22

          #5
          I used my castle hydra ice240 to check the data before i put the 180 in it is pushing it a bit but i have ran this setup all summer with no problem.

          Comment

          • martin
            Fast Electric Addict!
            • Aug 2010
            • 2887

            #6
            I think the t180 is underated, ive seen some pretty hot set ups with them & survived very well. What did you have the lvc set to, nice runs as well.

            Comment

            • ringo650r
              Junior Member
              • Aug 2012
              • 22

              #7
              The lvc is at 3.2 but i try not to hit the lvc in this run i made 3 speed runs and only used 1200mah out of 5000

              Comment

              • MAMBA2200
                I need a scooby snack
                • Jul 2012
                • 1202

                #8
                man that thing is screaming
                Im Only Responsible For What I Say Not For What You Understand

                Comment

                • SSchevy98
                  Member
                  • Sep 2012
                  • 90

                  #9
                  runs just fine
                  Deltaforce 33" cyberstorm 8s Lehner 2250/9 1315 kv/ Leopard 4082 1250 kv .

                  Comment

                  • ringo650r
                    Junior Member
                    • Aug 2012
                    • 22

                    #10
                    Ran a few days later and did a 75.9 but the boat took flight. It held up no damage!! And while doing a run about a week after that at 74.2 mph i had a wipe out and it came to a stop in about 5 feet now i have a small crack to repair. I will have it back on the water in a few days!!!

                    Comment

                    • steveo
                      Fast Electric Addict!
                      • Apr 2007
                      • 1454

                      #11
                      wow thats fast and that motor is a brute on 6s, what batteries are u using?

                      Comment

                      • ringo650r
                        Junior Member
                        • Aug 2012
                        • 22

                        #12
                        2 zippy 3s 5000mah 45c

                        Comment

                        • keithbradley
                          Fast Electric Addict!
                          • Jul 2010
                          • 3663

                          #13
                          Is this the fastest MC? I don't think I've seen one even close to this...nice work!

                          I think you should add something to the hatch though...you may end up blowing the hatch off eventually...plus, if the hatch is mounted solid and not allowed to move, it makes the whole boat more resilient to crashes.
                          www.keithbradleyboats.com

                          Comment

                          • gettinbrushless
                            Senior Member
                            • Jul 2012
                            • 135

                            #14
                            I gotta say shawn is the go to guy! He does the dirty work! But we like to push things hard!! Thats the fun though!!

                            Comment

                            • ringo650r
                              Junior Member
                              • Aug 2012
                              • 22

                              #15
                              Not sure if it's the fastest MC or not??? But I myself have not seen another on it the 70's. It would be nice to have the hatch set up the same way Keith set up my Evil Twin and Cheetah, it is much better than tape. Thanks again Keith. And Brian hopefully we will get your MC into the 70's next season! :)

                              Comment

                              Working...