Tweet
Here is another zonda cat that has wheelies on stock motors and a pair of 200 amp esc's. The trick To this is his batteries. A pair of 6s lipos 130c discharge.
-
Here is another zonda cat that has wheelies on stock motors and a pair of 200 amp esc's. The trick To this is his batteries. A pair of 6s lipos 130c discharge.
Last edited by twissted; 09-10-2012, 04:46 PM.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!! -
i thought you were all done on this forum? and i thought you were all set with the zonda cat…. -
tell me, is this your boat? looks fast… but doing wheelies with a boat does absolutely nothing for meComment
-
Dana,
Video was taken in Turkey.
But I saw and have some video of tunnelvision running this past sunday,
Was running very nice on 4s2p stock, But not sure on what props.
I will post it up when I can.
But no wheelies.
Comment
-
Comment
-
Would like to see that vid Lenny. I did take any pics or vid really this past weekend. Had a blast though!! I am running 442s from fightercat. Next step is 445s when I get some dough to upgrade. I am currently getting 5-6 minutes run times too with that setup.Go Fast...Turn Right...
Comment
-
Hears a link to the videos.http://forums.offshoreelectrics.com/...onda-and-GeicoLast edited by lenny; 09-01-2012, 01:36 PM.Comment
-
Looks like the geico is a lot faster. what is the zonda running with?twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
I found more zonda cat action
twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
4s on stock motors. 442 fightercat aluminum props. Runs nice, it's a great boat. Very happy with my purchase!Go Fast...Turn Right...Comment
-
I bought a couple of esc that are made by the same company that makes the fightercat esc's. About a mounth to get so I will be chipping ice off the boat when I get them.
specs;
Voltage 3-16s
Current 280A
Size(mm) 165*62*30
weight(g) 258g
BEC (Volts/Amps)
Box Programming support
Computer Programming support
Firmware update
I will be looking at some TP Power motors to get the most out of this boat. The 6s matched 130c nano's are what will be pushing this cat. and X447 props. I will look at the 50 mm props as well. I would like to get 80+ out of this boat. 12s is what it will take. I'll do some magic with the props as well. After that I will post some video.Last edited by twissted; 08-31-2012, 05:05 PM.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
Twissed
Yep go with the TP'S you will see a difference - these are the real Deal!!!!!!!
scottComment
-
I found another video.
twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
Twisted, it appears HOR is now selling the 2075kv 4 pole motors Kintec claimed was in thiers and as in yours... interesting...
Nortavlag Bulc Comment
? ONLY IF THEY WORK 
Comment