miss geico 4s testing x645 castle 1515

[joker rc]

MG 29 testing props for 4s club racing . i just finished back cutting and de-tongue x645 , might gain little more speed next run ,
current setup is castles 1515 /t180 4s2p .pranther 225 then we tried x645 .

[lenny]

Looking very nice on those runs,
I think it likes the 4s2p weight in that hull.
How are the temps on that setup and what mah cells are they ?

[joker rc]

cheers lenny ,, yeh temps are very cool . compered to leopard motor this motor hardly breaks a sweet ,even with a 48.7mm pranther 230 its still stayed cool max motor temp 45 deg c .esc 52 c with that prop ,,
they are zippy 45c 5000mah 4s , after 10 or so laps on this small test pond ,its was coming in with 35 -40 % charge left ,

[lenny]

That sound like a grate setup,
Did you do anything to the stock hull, Like blueprinting or truing ?
A lot of people have a hard time getting it to run with out the wawa.
I do nut have one yet, But I do have a Daytona with a Neu 1515 2200kv and 180a seaking,
Running a x442 on turnigy 4s2p 30c 5800 mah, Gps at 57 mph.
This hull likes more weight to.

[TheShaughnessy]

Where is the video.

[joker rc]

looking good that cat of yours lenny , yes i did lots of work to the hull ,ride pads trued and sharpen ,reinforced the hull seams and hatch in C/K and added 1 layer of carbon kevlar to strengthen up the hull floor ,moved lipos down in to pontoons .removed all the factory timber motor mount ect ect , fitted C/F 40mm motor mount on carbon fiber rails .all stock hard ware with kintec flex and offset rudder . running 2% -negative on the strut and its raised right up to keep it stable / planted .

dave !

[joker rc]

Where is the video.

can you not see the link , ?

[dana]

If he's looking on an iPhone like I am the link doesn't show

[joker rc]

should be able to view on mobile devices, as the Syndication is set to everywhere , strange ! heres a link to my channel http://www.youtube.com/user/450hp202turbo?feature=mhee