70mph FE JAE

[ALIENALESSIO]

Fe JAE21 70mph
Leopard 3674 motor , 180 amp Turnigy ESC, 6200mah EZ Power 50C lipo, X442 prop

http://youtu.be/q42tCK5XmdQ

[ALIENALESSIO]

apparition catamaran 65mph

http://youtu.be/J40ZIGDSFew

[Serpents811]

Fe JAE21 70mph
Leopard 3674 motor , 180 amp Turnigy ESC, 6200mah EZ Power 50C lipo, X442 prop

http://youtu.be/q42tCK5XmdQ

Im looking to put the same motor on my rigger with a castle ice 240amp but im concern with temps and amp draw , what was the temps after this run

[Fluid]

It is all pretty meaningless unless we know the Kv of the motor.



.

[Rumdog]

Vid description says 3270 kv...
Where do people get their ideas???!!

[Darin Jordan]

I'll have to see if I can dig out the video of Brian's Raptor going 70-something + mph 2-Way average with a Ul-1 motor on 4S1P 4200's... in Heat Racing trim...

[Serpents811]

I got a jae21 fe with a 3674 2400kv and previous to that a 2200kv and I have tried everything in the world and have not seen it go over 60mph , PLEASE SOME TELL ME THE TRICK Not to mention I have tried abc h series 4 thru 7 and octura m series and they all seen to be close to each other

[Fluid]

Tommy, tell us a few details:

Props tried
Exact pack used
Speed controller and timing setting
Strut setting
Water conditions when running

You should be able to go deep into the 60s - at least - with the right setup.



.

[Serpents811]

Tommy, tell us a few details:

Props tried
Exact pack used
Speed controller and timing setting
Strut setting
Water conditions when running

You should be able to go deep into the 60s - at least - with the right setup.



.

motor - tp power 3674 2400kv
Prop - abc h7 h6 , h4
Esc - castle ice 240amp
Lipo - maxamps 4s1p
Timing - 10deg
Strut - flat on the sky
Water - small chop to flat calm

this my latest video with rigger

http://www.youtube.com/watch?v=VTJQFLc2ZXA&feature=g-upl

[Rumdog]

maxamps... that could be your problem right there

[Serpents811]

maxamps... that could be your problem right there

i also use hyperion 4s1p and doesnt seen to make much different in fact it gets puff after 2 1/2 min of hard running

[Serpents811]

I'll have to see if I can dig out the video of Brian's Raptor going 70-something + mph 2-Way average with a Ul-1 motor on 4S1P 4200's... in Heat Racing trim...

[Brushless55]

I'll have to see if I can dig out the video of Brian's Raptor going 70-something + mph 2-Way average with a Ul-1 motor on 4S1P 4200's... in Heat Racing trim...

That is awesome!

[Serpents811]

I'll have to see if I can dig out the video of Brian's Raptor going 70-something + mph 2-Way average with a Ul-1 motor on 4S1P 4200's... in Heat Racing trim...

lets see 14.8 * 2030 =30,044 ,,,,,,,, what is he using a battleship prop

[Fluid]

Let's see, using a prop with ~3" of effective pitch will do it, not much different than the props you used. In fact it did it - I was there and saw the runs, officially timed by the NAMBA records chairman. Of course you have to know how to set up a rigger......

BTW if you want high GPS speeds you have to run longer than couple 100 feet in a straight line......

.