102 mph mono subs and smokes!

[Punisher 67]

I have to agree with you on everything Tyler......................

- extremely impressive run and yes it did look like a 100+
- 2000 Euros is probably a very good ball park figure

[RandyatBBY]

The first vid was neet, Man I hate to see smoke.

[Doug Smock]

Yes it was a GPS speed, but none the less very impressive.

No doubt.

[Jacked1]

You guys are correct on there being two esc's ( not a great picture I know ) . very interesting setup to say the least . A build thread would certainly be some interesting reading . You have to give the Germans credit for pushing the limits of what is possible in electric motor and ESC design .

Hey Gerwin where are you , some more info please

I am VERY interested! It either has two motors on one shaft or two esc's to one motor and both of those cases would be awesome to see how the did it.

[ManuelW]

Hello Guys,

the Mono already made a single pass with 106mph measured official pass on Swiss SAW last year, so it is capable of that speeds without doubts!

He runs 2x Schulze 40.160 on a LMT 3080 engine.

Best regards,
Manuel

[Punisher 67]

Thank you Manuel

Is there any chance of getting more info on how or what it take to set up a dual 40/160 ESC setup , also I would love to see a nice inside picture ...BEFORE...the accident if thats at all possible .

Thanks for any help.........................

[RandyatBBY]

Hello Guys,

the Mono already made a single pass with 106mph measured official pass on Swiss SAW last year, so it is capable of that speeds without doubts!

He runs 2x Schulze 40.160 on a LMT 3080 engine.

Best regards,
Manuel

So they are ganging up the controllers to carry the amp/watts load?

[Doug Smock]

Thanks Manuel, very nice.
What voltage??
Doug

[Jacked1]

Thank you Manuel

Is there any chance of getting more info on how or what it take to set up a dual 40/160 ESC setup , also I would love to see a nice inside picture ...BEFORE...the accident if thats at all possible .

Thanks for any help.........................

[Rumdog]

Sweet! Yeah, an interior pic would be great!

[MarkF]

To run 2 controllers on one motor you have to take the 3 wires coming out the back of the motor and split them in 2 equal parts making 6. Then you can add your 2 controllers. There's also a certain way that you have to start the motor up as well. It's probably easier to do this when you first wind the stator up. Adding 4 controllers to one motor doing the same method is also possible.

Mark

[Jacked1]

To run 2 controllers on one motor you have to take the 3 wires coming out the back of the motor and split them in 2 equal parts making 6. Then you can add your 2 controllers. There's also a certain way that you have to start the motor up as well. It's probably easier to do this when you first wind the stator up. Adding 4 controllers to one motor doing the same method is also possible.

Mark

So it works the best if you split the windings evenly? That makes a lot more sense.

[RandyatBBY]

To run 2 controllers on one motor you have to take the 3 wires coming out the back of the motor and split them in 2 equal parts making 6. Then you can add your 2 controllers. There's also a certain way that you have to start the motor up as well. It's probably easier to do this when you first wind the stator up. Adding 4 controllers to one motor doing the same method is also possible.

Mark

Thanks Mark You are quite the tec-head

[Doug Smock]

Thanks Mark You are quite the tec-head

Yes, please tell us more.

D.

[RIPFENCE]

what would be the reasoning for using 2 esc's here?...its an interesting idea for sure but i cannot think of the benefits...are they somehow splitting the load between the 2 of them and able to run extreme voltages/and have plenty of room for high current and big props?

subscribing too