Todays Vids Of Genesis & Saga

[F1 madness]

Hey guys,managed to get out again and give them a run.
Genesis was outstanding on the bigger props,tried 45mm CF prop 1st temps were pretty cool again even on the 120amp ESC on 4s till the i flipped it lol
2nd run was again impressive this on 47mm CF prop and 4s again temp on esc and batt a little warmer than before but again nothing to worry about and again the 2nd batt give way.
The batts keep blowing the solder on PCB,the repairs i done before held up and did it in a completely different place.
There supposed to be 5000mah,35C 4s1p,but what a load of 'rubbish' they are.
Lesson to be learned dont buy cheapo batts again.
The Saga was faultless again and has been worth every penny,my lad still learning to drive it and get used it LOL
Setup was 2x 3s1p,3200,20c batts and 32mm props and agin temps were as cool as could be.

Saga Cat

http://www.youtube.com/watch?v=eMDScojlDkE

Genesis Cat,45mmCF prop

http://www.youtube.com/watch?v=n4WWfFWhjbo

Genesis Cat on 47mm CF prop

http://www.youtube.com/watch?v=qTHvk8thhKo

[TotalPackage]

Hey guys,managed to get out again and give them a run.
Genesis was outstanding on the bigger props,tried 45mm CF prop 1st temps were pretty cool again even on the 120amp ESC on 4s till the i flipped it lol
2nd run was again impressive this on 47mm CF prop and 4s again temp on esc and batt a little warmer than before but again nothing to worry about and again the 2nd batt give way.
The batts keep blowing the solder on PCB,the repairs i done before held up and did it in a completely different place.
There supposed to be 5000mah,35C 4s1p,but what a load of 'rubbish' they are.
Lesson to be learned dont buy cheapo batts again.
The Saga was faultless again and has been worth every penny,my lad still learning to drive it and get used it LOL
Setup was 2x 3s1p,3200,20c batts and 32mm props and agin temps were as cool as could be.

Saga Cat

http://www.youtube.com/watch?v=eMDScojlDkE

Genesis Cat,45mmCF prop

http://www.youtube.com/watch?v=n4WWfFWhjbo

Genesis Cat on 47mm CF prop
http://www.youtube.com/watch?v=qTHvk8thhKo

Your batteries are getting wet.

[F1 madness]

Your batteries are getting wet.

Nope bone dry,just keeps blowing the solder on the PCB,already repaired them once

[Jedi Master]

I run my hulls at Chasewater, or at least I will when the main lake fills back up!

http://www.youtube.com/watch?v=60OWP-KQRkI

Nice runs with your cats, would be better on the main lake though!

http://www.youtube.com/watch?v=HGSMz6AiXmI

[F1 madness]

Hey jedi,yep cant wait for them to refill it,but they still doing the dam at mo.
You cant be that far away,maybe meet up and do some runs
Nice vids by the way
Speak soon bud

[Jedi Master]

Hey jedi,yep cant wait for them to refill it,but they still doing the dam at mo.
You cant be that far away,maybe meet up and do some runs
Nice vids by the way
Speak soon bud

Sounds like a plan. I only live 15 mins away. I run other RC's such as buggies, trucks etc, but no-one else in my network runs boats.

Next time you're planning a run, let me know!

[F1 madness]

Sounds like a plan. I only live 15 mins away. I run other RC's such as buggies, trucks etc, but no-one else in my network runs boats.

Next time you're planning a run, let me know!

Cool will do,iv also found another pool alot bigger from i can work out and have a dingy with electric outboard on for rescuing going over in the next week or 2.
What you doing tonite,theres a chasewater model boat club now and meeting in the turf tonite at 7.00pm if you wanna pop down