Delta Force 33" by nikos222

[nikos222]

This is my 2nd project.
A Delta Force 33".

I built it from the beggining, buying the most of the parts (hull incl.) from OSE.

So, the basic setup is :

Motor, Leopard 4074 (2000Kv)
Esc, 180 amp turnigy marine
Batteries, 2 x 4s (par.) 3000mah each
Drive Hardware, Speadmaster
Prop. x442

This is the 2nd try for trimming the boat.
I'll try soon the x445.

http://www.youtube.com/watch?v=EiYxuSid_tE

[Chuck E Cheese]

looks like you need to get some negitive strut angle on that thing to bring the nose down. try starting with 1 full turn at a time (speedmaster stinger)

[nikos222]

Thank you Chuck E Cheese.
I'm sorry, but i can't open your link.

Maybe something's wrong.

[TotalPackage]

Great start . Looks good and strong. Definately a good starting point

[Jeff Wohlt]

X642 or 447 or 645 will get her cooking. Even the M545 is a sweet one.

[nikos222]

This is my last and i think my best run for my DF 33" (...till my next one) !!!!

Batt. : 2 x 5s parall.
Prop. : 1,4 x 45mm.

http://www.youtube.com/watch?v=P4f2orknwxw

[martin]

Thats under proped, Go with some of the props suggested with more pitch.

[nikos222]

This is a new test with my new prop. An Octura M645.
I'm not content.
A lot of times, the boat it was outside of the water level. Something like small "flyies".
So, i couldn't run it till the end of the r/c path.
Maybe because the diam. of the prop, or/and the pitch are too large for this boat.

http://www.youtube.com/watch?v=qEZjdnrUt24

[nikos222]

...welcome on 6s!!!
So, the current setup is : Leopard 4082, turnigy 180A, 6s, 440/3.
Speed : 81,6 km/h.

http://www.youtube.com/watch?v=AZitp7KFc6A