F1 28" Maiden Vids

[TotalPackage]

Cant wait to see it

[F1 madness]

shes running wet huh? where do you go from here? Awesome modeling.

this is the next project LOL
+ i got another couple on the go at mo aswell
http://forums.offshoreelectrics.com/...ad.php?t=16976

[F1 madness]

Another flippin vid LOL

another vid from today:popcorn:

[bigpapa]

Awsome day my friend looking good daz

[Rumdog]

Looks like the tunnel may be packing too much air.

[TotalPackage]

Looks like a foward cg shift or some negative angle on your outboard trim will do the trick. You got the skillz why not an 3rd channel adjustable trim on the outboard? then you can really get it dialed in quick! With your designs youre really on to something.

[F1 madness]

Awsome day my friend looking good daz

will look even better if i could stop porpoising

Looks like the tunnel may be packing too much air.

it is LOL

Looks like a foward cg shift or some negative angle on your outboard trim will do the trick. You got the skillz why not an 3rd channel adjustable trim on the outboard? then you can really get it dialed in quick! With your designs youre really on to something.

Im having a bit of trouble to be honest,cg is around 40% with the 2 x 3s batts in the front, and running 3* neg angle.
Iv guuted the inside and gonna lye batts flat end to end and add a platform for the ESC & rx to sit on above the batts and move the servo to the front.
What i think is happening is with the 2 batts side by side in the front,the weight of the batts is weighing the down while the prop is is trying to lift the nose this is what maybe causing the porpoising as they fight each other if you know what i mean.
AS for the adjustable angle i have thought about using a gyro system of a heli with a small servo,and a lever moving a cam inside the mount,its just working it out

Just to add aswell,the porpoising got worse when i installed the bigger batts.