Delta Force 33 47MPH flip

[LiPo Power]

This is the damage after acrobatic flip/turn/dive etc on my delta force 33. Too bad I have no video of it but pictures are here...... Jesse!!!! Where do I get this part new???
I need to fix it before next Saturday....
Cheers
Robert

http://www.youtube.com/watch?v=BhP9bWxHa78

[Raydee]

CHeck out the second half of this vid. EverythingRC's Delta 33" doing som nice acrabatics at about 60mph. He also bent his rudder but the actual blade. I didn't get any pics of the blade.

http://www.youtube.com/watch?v=434zgBgm1NI&feature=channel_page

[LiPo Power]

Delta Force 33 damage

CHeck out the second half of this vid. EverythingRC's Delta 33" doing som nice acrabatics at about 60mph. He also bent his rudder but the actual blade. I didn't get any pics of the blade.

http://www.youtube.com/watch?v=434zg...e=channel_page

Yap! That is just like watching my boat going in to the air.....

[Rumdog]

Why not just bend it back?

[Doby]

It was a sight to see when it flipped, rolled, bounced etc.

Hey Robert, Were is the GPS pic of my new personal best of 58.6Mph today on 4S?????

[LiPo Power]

What picks of personal best of 58.6MPH ????
Was the boat red or yellow????
Comming up soon.....
Did you respond to my e-mail quastion for you?

[LiPo Power]

It was a sight to see when it flipped, rolled, bounced etc.

Hey Robert, Were is the GPS pic of my new personal best of 58.6Mph today on 4S?????

Here it is my friend.....
Two pictures for everyone with little trouble seeing it.....
Good Job!!!

[LiPo Power]

Why not just bend it back?

I have try this but it cracked at the mounting to the boat spot so I still need a new one....

[properchopper]

I've had the same bracket bending problems; got a piece of thick aluminum angle, a little sawing, drilling, grinding and no more bent brackets.

[Jesse J]

sorry robert, I deleted it cause of the subject line: put something that makes me know its you. I get way too much spam and don't open stuff unless I am sure its from valid sources.

I am not sure where, I got that bracket from Nate, so I am not real sure of brand. Thought it was speed master, though. I would personally go with the propperchopper solution, will get it fixed quick too!

good luck.

[LiPo Power]

sorry robert, I deleted it cause of the subject line: put something that makes me know its you. I get way too much spam and don't open stuff unless I am sure its from valid sources.

I am not sure where, I got that bracket from Nate, so I am not real sure of brand. Thought it was speed master, though. I would personally go with the propperchopper solution, will get it fixed quick too!

good luck.

Thank You Jesse

[properchopper]

Robert, contact Ray Fuller at : [email protected]. I got a bracket (like the one you bent) from him. Tell him you want the extended bracket for the Speedmaster .21 mono rudder.

[LiPo Power]

Robert, contact Ray Fuller at : [email protected]. I got a bracket (like the one you bent) from him. Tell him you want the extended bracket for the Speedmaster .21 mono rudder.

Thank You.
I will.
Robert

[LiPo Power]

Robert, contact Ray Fuller at : [email protected]. I got a bracket (like the one you bent) from him. Tell him you want the extended bracket for the Speedmaster .21 mono rudder.

Ray has one that is 3 1/4 x 1.1/4 I am not sure if that is what you have in mind.
I need this Before Saturday. Would like to take my DF to

http://www.wellesleyabcfestival.ca/

DOBY may be able to help me on time. Ray would ship one by global priority mail but I do not know if this part will get here on time. ( propably not )
Thank You for help, good staff
Robert

[LiPo Power]

DF rudder bracket bent problen

This is where the problem is after trying to make it straight...