Modded to Electric 36"Pro Boat Shockwave I finally put some paint on it.

[lenny]

Modded to Electric 36"Pro Boat Shockwave I finally put some paint on it.
I moved the 120 amp esc timing up to 15* on the leopard 4074 2200kv,
And got 45mph with 4s2p 25c 5800mah packs and a x646/3 prop and temps were good too.

36 Shockwave mod. 011.jpgphoto.jpg20241022_122143.jpg

[lenny]

20241212_155445.jpg20241220_113156.jpg20241220_113034.jpg20241209_131351.jpg

[srislash]

Looks good Lenny. A Shockwave is on my list of builds one day.
Shawn

[lenny]

Hey thank you,
I'm still trying to get passed half throttle on 4s but still have control of it.
I was thinking of adding longer trim tabs to get the stern more planted in the water at higher speed,
also I may try propping down some too.
I'm thinking it could be prop walking the stern of the hull out of the water once it's on plane and at about 45 mph.

[srislash]

Yeah I fought my 35” DF on that. Tabs were the only fix. I’m going to rebuild that one soon.
It is likely prop walking. Do you have adjustment in strut?

[lenny]

Happy new year.
There is a little adjustments because I slotted the bolt holes a little so I may try a neutral or a little negative on the strut, if not I'll try modding the trim tabs that are on it to be 1"longer then the 1"1/8 L x 2" W stock ones that are on it now and see how that helps with the ride of it.

36 Shockwave mod. 008.jpg36 Shockwave mod. 001.jpg36 Shockwave mod. 009.jpg36 Shockwave mod. 006.jpg20241002_135729.jpg