MMP Raipde? FINALLY!!

[srislash]

I built this a while back and had it disassembled for paint when we sold our house a bought in a new location within the province. I now have a lake in my front view!
So finally got settled(sort of) enough to paint her up and reassemble. The new Geico boat is now ready for water!!

0CE52281-4A03-41DF-8040-07359AF7CE76.jpg8A156FD3-3408-4A1E-9058-6B72569EC2DC.jpgCE087AFE-1F22-499A-AEAB-94E43E0D5014.jpg

Swordy 220 Pro+ powering a Castle 1518 ruddered by Minimeca

[fweasel]

Looks great. Lets see the inside too!

[srislash]

Looks great. Lets see the inside too!

Here you go Ryan;

A30A0E67-593E-4715-B011-87E27ED8B19F.jpg4F28991E-9DBE-46D1-83CC-75DD03D41F7F.jpg

[fweasel]

Wow that's a narrow hull.

[srislash]

Wow that's a narrow hull.

My original plan was for a 1100kv outrunner on 4s for rough water running as that narrow hull should cut waves real well, but now that I live here I had to speed things up a bit And perhaps a quicker straight line thang is in order

[fweasel]

Is the new lake in the front yard RC boat worthy? If so, well done sir.

[srislash]

Yes it is boat worthy , has a few weed on edge but so for everything remains 6+inches below surface. And there is plenty of room to run at this date during this northwest drought year

[Alfa Spirit]

Beautiful mono, congrats. Inspired by the Colibri

temp_128.jpg

[srislash]

Beautiful mono, congrats. Inspired by the Colibri

[ATTACH=CONFIG]173416[/ATTACH]

Thanks pal, long time no chat, hope things are well.

[Alfa Spirit]

Not so bad, thanks. I' ve got the same MMP Rapid, this hull need love and I need time too. Awesome design.

temp_334.jpg

[srislash]

Not so bad, thanks. I' ve got the same MMP Rapid, this hull need love and I need time too. Awesome design.

[ATTACH=CONFIG]173417[/ATTACH]

I like the green stripe

[Olieboll62]

very very nice!!!, still my all time favorite hull i had a nice one in white (also featured on the MMP website) i ran it on 2x 6s 5000mah parralel with crazy long runtime at 115km/h but for it to corner correctly at speed you need a very long turnfin

[srislash]

very very nice!!!, still my all time favorite hull i had a nice one in white (also featured on the MMP website) i ran it on 2x 6s 5000mah parralel with crazy long runtime at 115km/h but for it to corner correctly at speed you need a very long turnfin

I have only run this on 4s so far and it is doing well. I haven’t had any boating time yet this season. Thank you guys for the comments.
Shawn

[Scottersim00]

Looks great