Motley Crew new paint / decals

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DLDESIGN
    Junior Member
    • Aug 2012
    • 8

    #1

    Motley Crew new paint / decals

    My buddy with a modded rio 51z jumped my motley crew by accident and took a nice chunk out where there was decals on the body so i patched it and decided to sand it and lay down some matte white and new decals. and did the tray in carbon fiber DECAL just for looks and heres what i ended up with. Original decals were cool but had a little too much goin on for my liking.

    image.jpgimage_1.jpgimage_2.jpg
  • Jason4636
    Senior Member
    • Jun 2012
    • 654

    #2
    Looks good! here's mine
    1.jpg
    But I think I'm going to put mine up for sale this weekend.

    Nice boat, I like it with the white. Don't even look like the same boat

    Comment

    • DLDESIGN
      Junior Member
      • Aug 2012
      • 8

      #3
      What motor esc you runnin?

      Originally posted by Jason4636
      Looks good! here's mine
      [ATTACH=CONFIG]83955[/ATTACH]
      But I think I'm going to put mine up for sale this weekend.

      Nice boat, I like it with the white. Don't even look like the same boat
      What motor / esc u runnin and how much you askin for the boat? I might take it off your hands if the price is right

      Comment

      • Make-a-Wake
        FE Rules!
        • Nov 2009
        • 5557

        #4
        Looks super clean DLD!!
        Attached Files
        NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

        Comment

        • Jason4636
          Senior Member
          • Jun 2012
          • 654

          #5
          I'm running a Leo 4074 2200kv, Castle Creations 120a Hydra esc, Traxxas waterproof servo, a x442 S/B, Tactic TX/Rx, with dual water in & outlets, plus I used 2 part foam inside the hull cavity for more strength. The only reason I'm going to sell it is cause i just bought a Miss Gieco. I'll tear it down and rebuild it with all after market parts to. Then I'm selling it to build my FC cheetah.
          2.jpg
          6.jpg4.jpg5.jpg

          I'd like $350 for it, I'm kinda firm on that price. For how much I have in this boat. With the original price of the boat, and all the upgrade I have around $600+ in it I think.

          In the pics I have a T-180 but I'll put the Hydra back in it when I sell it. The t-180 is going in the gieco with a 4082 2200kv

          Comment

          • DLDESIGN
            Junior Member
            • Aug 2012
            • 8

            #6
            Originally posted by Jason4636
            I'm running a Leo 4074 2200kv, Castle Creations 120a Hydra esc, Traxxas waterproof servo, a x442 S/B, Tactic TX/Rx, with dual water in & outlets, plus I used 2 part foam inside the hull cavity for more strength. The only reason I'm going to sell it is cause i just bought a Miss Gieco. I'll tear it down and rebuild it with all after market parts to. Then I'm selling it to build my FC cheetah.
            [ATTACH=CONFIG]83959[/ATTACH]
            [ATTACH=CONFIG]83960[/ATTACH][ATTACH=CONFIG]83961[/ATTACH][ATTACH=CONFIG]83962[/ATTACH]

            I'd like $350 for it, I'm kinda firm on that price. For how much I have in this boat. With the original price of the boat, and all the upgrade I have around $600+ in it I think.

            In the pics I have a T-180 but I'll put the Hydra back in it when I sell it. The t-180 is going in the gieco with a 4082 2200kv
            Any chance youd like to sell the leo and hydra?

            Comment

            • Jason4636
              Senior Member
              • Jun 2012
              • 654

              #7
              Sure, $175 sound about right. The hydra was 175 an motor 100

              Comment

              Working...