SV-27 getting face lift

[SirBudman32]

Bought a used SV-27 last summer. Had a couple dings in it, one on the bow and one on the bottom. Got them all fixed up, but some new glass on the inside and a doubler for the stern from Kintec. Lot of sanding but got it all smoothed out and the bottom flat with all edges sharp not round and wavy. All in primer right now, but the plan is a white bottom red top with a black strip. Doing a Tony Stewart theme.


SV-27(2).jpgSV-27(3).jpgSV-27(4).jpgSV-27(5).jpgSV-27(6).jpg

[SirBudman32]

Ok got a white base coat on and starting to lay out graphics.


SV-27(12).jpgSV-27(9).jpgSV-27(13).jpgSV-27(14).jpgSV-27(15).jpg

[SirBudman32]

Ok getting some color on it. Not bad except for a few fish eyes, don't no why, I wiped it down really good. Oh well more sanding to get rid of them and shot it again.


SV-27(16).jpgSV-27(17.jpgSV-27(18).jpgSV-27(19).jpg

[domwilson]

Pretty impressive so far. Keep the pics coming.

[SirBudman32]

Ok, second time around for the hatch. Was not happy with it first time so I redid it. Thinks it looks better this way. Need to color sand it, put windshield on and clear it then of too the hull. More to come.


SV-27(20).jpgSV-27(22).jpgSV-27(27).jpgSV-27(25).jpgSV-27(24).jpg

[SirBudman32]

Got all the blue anodize off the hard ware. Think it looks better and will go with y paint scheme better.


SV-27(28).jpg

[SirBudman32]

Ok got all the paint work done, seems like it took forever. Now just need to water sand the hole thing down and off to the clear. I think it came out pretty good for using spray cans, and no stickers all paint. Put sticker on to paint then took all off.

IMG_20120418_135802.jpgIMG_20120418_135816.jpgIMG_20120418_135828.jpgIMG_20120418_135839.jpgIMG_20120418_135851.jpg

[SirBudman32]

some more pics.

IMG_20120418_135901.jpgIMG_20120418_135915.jpgIMG_20120418_135929.jpgIMG_20120418_135955.jpgIMG_20120418_140024.jpg

[SirBudman32]

Last ones.

IMG_20120418_140043.jpgIMG_20120418_140107.jpgIMG_20120418_140136.jpgIMG_20120418_140149.jpgIMG_20120418_140339.jpg

[G-UNIT]

Spray bomb job or gun? eather way looks good.

[SirBudman32]

Thank you. Spray can (bomb).

[SirBudman32]

Finally Done

Well it took a while, but its done.

IMG_20120601_211448.jpgIMG_20120601_211604.jpgIMG_20120601_211618.jpgIMG_20120601_211644.jpg

[SirBudman32]

A couple more.

IMG_20120601_152747.jpgIMG_20120601_211535.jpgIMG_20120601_211549.jpgIMG_20120601_211802.jpgIMG_20120601_212136.jpg