Twin 6S rigger - Done!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • LarrysDrifter
    Big Booty Daddy
    • May 2010
    • 3278

    #16
    I didn't realize that about counter rotating props on a Rigger, but it makes sense. I've never owned or ran a rigger. I think, if you want to make SAW passes, the counter props will work well, but as Jay said, use standard rotation props for good turning. I think the ABC props I suggested are de-tounged. I could be wrong. I run them on a 32" twin cat with 2800kv 540's on 4s each side. It's been a while since I ran X447's and the ABC's in the same day, so I'm guessing the difference was between 5-10 mph. It seemed like the boat just didn't "like" the 47's. Maybe they loaded the motors too much not letting them reach full rpm. It really "woke up" with the ABC's and has run a best of 81mph on GPS. I'm merely suggesting another set of props that worked well for me and give you another option for props. OSE has ABC's where you can pick what pitch you want on certain props. Some go up to 1.8, so you might want to have a look at those too. www.rocketcityracing.com has generous assortment of ABC props too.

    Comment

    • Chris Harris
      Senior Member
      • Oct 2007
      • 182

      #17
      I'm thinking your turn fin may not be big enough if your intent is to run ovals. That is a lot of weight hanging on that fin in the turns. Your boat is about the same size and weight as a gas rigger and they run turn fins that have more suface area than the one your using. It doesn't necessarily have to be any deeper but I would double the surface area. You might have to look at rudder placement as well. Usually riggers have the rudder off to the right hand side and further back from the transom. Cool project though, I can't wait to see some video.

      Chris
      I.M.P.B.A. Record Holder P-Hydro 111.001mph Q-Hydro 120.192mph S-Hydro 139.233mph

      Comment

      • ksm2001
        Senior Member
        • Jun 2007
        • 377

        #18
        Congrats Mike, very nice build indeed. That's some horse power under the hood, I cant wait to see some video also

        Ken
        DF-29,Phil Thomas Super Sport 45, SV27, Xzess 2 Evo, HOTR 32" Cat

        Comment

        • mm123521
          Senior Member
          • Sep 2010
          • 150

          #19
          Chris,

          Today I called Joe P. from Zippkits (they sell the JAE line of riggers).
          He said the same thing as you -- the turnfin is way too small and the boat is slipping sideways faster than the rudder can scoot the stern around the curve.
          I am not ready to give up on counter rotating props just yet, although it may be necessary as Jay states.

          Joe is sending me a turnfin that is sized right for this boat and HE WOULD NOT TAKE ANY MONEY FOR IT !!!! WHAT A GUY! ZippKits forever!!

          Joe is also saying that slips in the range of 8% to 9% are obtainable with his setups -- If that is true with my rigger, I could be close to 90 MPH right now -- this is yet to be seen (I would feel lucky if I could achieve those numbers). I gotta get a GPS run going, soon.

          Mark
          Last edited by mm123521; 08-01-2011, 05:40 PM.
          Avatar is the dangerous end of a Gatling Gun!

          Comment

          • Brushless55
            Creator
            • Oct 2008
            • 9488

            #20
            this is cool!
            I've thought about doing a JAE 45 and running twin CC1520's on 8s
            .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

            Comment

            • mm123521
              Senior Member
              • Sep 2010
              • 150

              #21
              Brushless:

              Gees! thats 47,000 RPM!! I wanna see that!
              Can you cram all those motors and batteries in a 45?

              =======================================

              OK, I put the boat back together after drying it out.
              Taped it up the hatches, threw it in the truck, and down to the lake.
              The GPS said 82MPH --

              Now come the excuses!! I didnt get a good long run, the radio was only getting about 400 foot range. It looks much faster?!
              82 is just under the 15% slip speed for this setup.

              This is the first time that I used this RX -- Next run will be with a known good RX.

              I tried 2 full speed turns and it goes right around the corrner! I got about a 60 foot diameter "U" turn.
              This boat wont make a tight, low speed turn, but it makes nice full speed turns?
              Maybe this makes sense, because the ski's are like long striaght rudders and at low speed they are in the water and high speeds they are above the water???

              Anyone out there with a JAE rigger? Is this the way they are supposed to work?

              Boat ran flat, smooth, and striaght.
              It would make nice, gentle, full speed, left turns -- about what you would expect.

              The boat came back dry this time.

              RumDog: Sorry no video -- called my boating buddy, but he was busy.
              Mark
              Last edited by mm123521; 08-01-2011, 09:08 PM.
              Avatar is the dangerous end of a Gatling Gun!

              Comment

              • Brushless55
                Creator
                • Oct 2008
                • 9488

                #22
                Originally posted by mm123521
                Brushless:

                Gees! thats 47,000 RPM!! I wanna see that!
                Can you cram all those motors and batteries in a 45?

                Mark
                Mark, I would need someone to make the tub wider so I can fit the motors and batteries
                .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                Comment

                • mm123521
                  Senior Member
                  • Sep 2010
                  • 150

                  #23
                  Joe (From ZippKits) sent me not one, but TWO turnfins!!!!!!
                  He sent them via priority mail -- I cant believe they arrived so soon!!!

                  I installed one after work, charged batteries, taped the hatch, and off to the lake.

                  THE BOAT RAN GREAT!!!!!!
                  IT TURNS ON A DIME NOW!!!
                  Chris and Joe were spot on! The turnfin was just too small.
                  It has VERY predictable handling, and even makes nice, smooth left turns.

                  ESC's were cool, batteries were cool, and motors were cool.

                  Now its time to prop up!!

                  Thanks all for helping with their sugestions!!

                  Mark
                  Last edited by mm123521; 08-03-2011, 10:54 PM.
                  Avatar is the dangerous end of a Gatling Gun!

                  Comment

                  • Jacked1
                    Senior Member
                    • Jun 2010
                    • 772

                    #24
                    Awesome!!!! :D
                    Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

                    Comment

                    • Doug Smock
                      Moderator
                      • Apr 2007
                      • 5272

                      #25
                      Originally posted by mm123521
                      Joe (From ZippKits) sent me not one, but TWO turnfins!!!!!!
                      He sent them via priority mail -- I cant believe they arrived so soon!!!

                      I installed one after work, charged batteries, taped the hatch, and off to the lake.

                      THE BOAT RAN GREAT!!!!!!
                      IT TURNS ON A DIME NOW!!!
                      Chris and Joe were spot on! The turnfin was just too small.
                      It has VERY predictable handling, and even makes nice, smooth left turns.

                      Now its time to prop up!!

                      Thanks all for helping with their sugestions!!

                      Mark
                      They just don't come any better than Joe! Chris either for that matter.
                      Cool project Mark, looking forward to some video.
                      Doug
                      MODEL BOAT RACER
                      IMPBA President
                      District 13 Director 2011- present
                      IMPBA National Records Director 2009-2019
                      IMPBA 19887L CD
                      NAMBA 1169

                      Comment

                      • Chris Harris
                        Senior Member
                        • Oct 2007
                        • 182

                        #26
                        COOL! I'm glad you got her turning good now. That must be a sight seeing that thing rip around the corners at 80mph!!!

                        What props are you going to try next? Maybe a couple of ABC H-7's with some cup or maybe H-10's. They both have a bit more pitch than the 447's and a lot better blade design especially for hydros.

                        Now about prop slip. In theory you should be able to get better efficency with two props doing the work but prop design will have more to do with that. I think the 15% that your getting now is pretty good but you should be able to up it a little with better props.

                        Chris
                        I.M.P.B.A. Record Holder P-Hydro 111.001mph Q-Hydro 120.192mph S-Hydro 139.233mph

                        Comment

                        • Steven Vaccaro
                          Administrator
                          • Apr 2007
                          • 8720

                          #27
                          Any video?
                          Steven Vaccaro

                          Where Racing on a Budget is a Reality!

                          Comment

                          • mm123521
                            Senior Member
                            • Sep 2010
                            • 150

                            #28
                            Heres a video.

                            When the new, much, bigger turnfin went on the speed dropped to 70 MPH -- Darn it!
                            Notice the hopping -- that was not there before with the small turnfin.

                            The hopping goes away with the slightest right turn.
                            It may not show on this video - I have done a bunch of tweeking sense that video was taken.

                            ESC's, batteries, and motors all come back cool.
                            I get good run time, so It looks like the motors are running easy, but my slip is 29% -- very bad.
                            Maybe the props are running in non-smooth water and are not "hooking up"??
                            The hopping isnt helping.
                            Weight on the props is about 3.75 to 4 pounds. I wonder if the props have too much lift, tipping the boat down and causing the turnfin to "pull down".

                            How come it hops?
                            I have adjusted the angle of the turnfin.
                            I have adjusted the position of the rear battery to shift the CG.
                            I have tilted the struts down slightly, to get more prop imersion.
                            Nothing has worked

                            I put on a pair of non-counter rotating X452 props and it really messed up the handling.
                            It would take a 30 degree right turn when you hit the throttle - it was really hard to steer like that, so I took them off.

                            I have ordered a set of PropShop 5014 right and left, 3 blade, props. 50MM and 2.75 inch pitch. Maybe they will help?

                            GP/5014/3/LH/BR ----- £20.58
                            GP/5014/3/RH/BR ----- £20.58
                            Delivery: £8.55
                            VAT: £9.95
                            Total: £59.66 = about $100-- ouch!!!

                            These props are 3 MM bigger, and 3 blade insted of 2, and the pitch goes from 2.59 to 2.75 -- these have gotta buy me a little more speed.
                            I need to exceed 85 MPH (the record or our little lake is 85 MPH) -- That should be a modest goal for the installed horsepower, if I can get the hull to run correctly.



                            My 9 year old Niece was filming!!!

                            Mark
                            Last edited by mm123521; 08-07-2011, 10:19 PM.
                            Avatar is the dangerous end of a Gatling Gun!

                            Comment

                            • Jeepers
                              Fast Electric Addict!
                              • May 2007
                              • 1973

                              #29
                              Little lake? you couldn't even get that boat to that speed on our lake!! wow that thing is quick!

                              OH and your niece films great!

                              Comment

                              • Chris Harris
                                Senior Member
                                • Oct 2007
                                • 182

                                #30
                                Was that still with the L&R X447's ? First down angle on the struts is only going to make the hopping worse. I would put them to neutral and see where that gets you.
                                Second when you changed the angle on the fin did you move the bottom of it toward the rear or forward? On curved turnfins the more you angle them back the more it will suck down the bow, conversly if you angle it too far forward it becomes a hydro foil and lifts way too much usually flipping the boat. The turnfin can be used to tune the ride attitude to get the nose up where you want it. It looked to me like it was running wet up front and tail high. If the turnfin was the only change from when you run it before the hop try angling the bottom of the fin torward the front a little bit at a time and see if you can get the hop out that way. (along with your struts to neutral) Beyond that you could give the props a bit of cup to take some lift away, but I would definitely try the simple stuff first.

                                Chris
                                I.M.P.B.A. Record Holder P-Hydro 111.001mph Q-Hydro 120.192mph S-Hydro 139.233mph

                                Comment

                                Working...