What is hot and rocking at BBY

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Shooter
    Team Mojo
    • Jun 2009
    • 2558

    #331
    Nice touch with the black outline on the green letters! Very nice. Any progress on the Smokin Joe? Thanks!

    Comment

    • RandyatBBY
      Fast Electric Addict!
      • Sep 2007
      • 3915

      #332
      Originally posted by Shooter
      Nice touch with the black outline on the green letters! Very nice. Any progress on the Smokin Joe? Thanks!
      I have been painting mostly. Did you see this picture? I just cut off the sponson to be able to machine the front of the hatch opening. I will reglue the sponson after I am happy with the hatch.


      I will fill with resin to make a hard machinable shelf.


      Uploaded with ImageShack.us
      Last edited by RandyatBBY; 11-10-2010, 11:05 PM.
      Randy
      For ABS, Fiberglass, Carbon hulls and Stainless hardware
      BBY Racing

      Comment

      • RandyatBBY
        Fast Electric Addict!
        • Sep 2007
        • 3915

        #333
        I am really like this paint job. I never use green, I guess that is why.

        Randy
        For ABS, Fiberglass, Carbon hulls and Stainless hardware
        BBY Racing

        Comment

        • RandyatBBY
          Fast Electric Addict!
          • Sep 2007
          • 3915

          #334
          TTH I have just finished your Stainless strut. What motor are you going to use? I need to know to build the motor mounts. I would run a 1527 1D on 4S2P. It would be good or oval on that setup and great for SAW with 6S.
          I also glued your sponsons yesterday and set the booms





          Uploaded with ImageShack.us
          Randy
          For ABS, Fiberglass, Carbon hulls and Stainless hardware
          BBY Racing

          Comment

          • Shooter
            Team Mojo
            • Jun 2009
            • 2558

            #335
            Nice!!!!

            Originally posted by RandyatBBY
            I have been painting mostly. Did you see this picture? I just cut off the sponson to be able to machine the front of the hatch opening. I will reglue the sponson after I am happy with the hatch.

            Comment

            • RandyatBBY
              Fast Electric Addict!
              • Sep 2007
              • 3915

              #336
              I have been trying to get back to the Oval/SAW lift Master. but parts came in to this boat and several customers the last three days.
              Little more work done finishing the radio and odds and ends.

              Rear view

              I got the little emblem done


              Uploaded with ImageShack.us
              Randy
              For ABS, Fiberglass, Carbon hulls and Stainless hardware
              BBY Racing

              Comment

              • tth
                Fast Electric Addict!
                • Apr 2008
                • 1510

                #337
                Sorry for the delay in contact Randy. My entire immediate family has been ill.

                The motor will be a 1527. Thanks for the pics great job.
                * BBY Lift Master RIgger * Insane Gen 2 Cat * Aeromarine Avenger Pro Twin * Delta Force Cyber Storm * Delta Force 41" Mono * H&M Viper II * H&M Intruder * OSE Raider Hydro * Whiplash 20 * Brushless Mini Rio *

                Comment

                • RandyatBBY
                  Fast Electric Addict!
                  • Sep 2007
                  • 3915

                  #338
                  Originally posted by tth
                  Sorry for the delay in contact Randy. My entire immediate family has been ill.

                  The motor will be a 1527. Thanks for the pics great job.
                  That is cool, I totally understand. thanks for the info. Hope all your family gets better fast.
                  Randy
                  For ABS, Fiberglass, Carbon hulls and Stainless hardware
                  BBY Racing

                  Comment

                  • RandyatBBY
                    Fast Electric Addict!
                    • Sep 2007
                    • 3915

                    #339
                    Just finished this little beauty. My feet are freezing!!!! Winter sucks!



                    Uploaded with ImageShack.us
                    Randy
                    For ABS, Fiberglass, Carbon hulls and Stainless hardware
                    BBY Racing

                    Comment

                    • Shooter
                      Team Mojo
                      • Jun 2009
                      • 2558

                      #340
                      Cold feet in Cali?? Really? It's funny, I was just talking to a co-worker of mine. He built a new pole barn and is using radiant heat in the floor. A water heater heats the water and it is pumped through tubing in the concrete. Makes it pretty cozy! Especially on your feet!

                      Comment

                      • BILL OXIDEAN
                        Banned
                        • Sep 2008
                        • 1494

                        #341
                        Originally posted by Shooter
                        Cold feet in Cali?? Really? It's funny, I was just talking to a co-worker of mine. He built a new pole barn and is using radiant heat in the floor. A water heater heats the water and it is pumped through tubing in the concrete. Makes it pretty cozy! Especially on your feet!

                        Don't give Naylor any ideas, I'm comin' in this week he's liable to have the whole freakin floor ulled u in his factory installin that stuff.

                        The guy has low tollerance for extreme cold or heat

                        Comment

                        • RandyatBBY
                          Fast Electric Addict!
                          • Sep 2007
                          • 3915

                          #342
                          Originally posted by BILL OXIDEAN
                          Don't give Naylor any ideas, I'm comin' in this week he's liable to have the whole freakin floor ulled u in his factory installin that stuff.

                          The guy has low tollerance for extreme cold or heat
                          You are correct not under 66 not over 74 is just perfect for me the older I get the narrow it gets. . And I do want that heater in my bathroom at home. In fact it is one of my dreams. But the new 2 car garage is first.
                          Randy
                          For ABS, Fiberglass, Carbon hulls and Stainless hardware
                          BBY Racing

                          Comment

                          • RandyatBBY
                            Fast Electric Addict!
                            • Sep 2007
                            • 3915

                            #343
                            Had a friend drop off a new toy. Not sure what I am going to do except add electrics. It is a Fritz's hull, Damon has first dibs if I do not keep it.



                            Uploaded with ImageShack.us
                            Randy
                            For ABS, Fiberglass, Carbon hulls and Stainless hardware
                            BBY Racing

                            Comment

                            • RandyatBBY
                              Fast Electric Addict!
                              • Sep 2007
                              • 3915

                              #344
                              Newest CF/FG hull ready to clean PVA off with cold water and paint.




                              Uploaded with ImageShack.us
                              Randy
                              For ABS, Fiberglass, Carbon hulls and Stainless hardware
                              BBY Racing

                              Comment

                              • RandyatBBY
                                Fast Electric Addict!
                                • Sep 2007
                                • 3915

                                #345
                                I got left alone for a little time and was able to make this motor mount for TTH's rigger.


                                Uploaded with ImageShack.us
                                Randy
                                For ABS, Fiberglass, Carbon hulls and Stainless hardware
                                BBY Racing

                                Comment

                                Working...