Albert Lee 1/8

[Peter A]

I've been working on this one for a while. It is a conversion from nitro to electric. Running a SK8 motor, ZTW 150 HV esc, Panther graphenes 10s 5000mah. Props so far x447/3, 450. Only four runs on it so far so still dialing it in and finding water ingress points.

20210710_113733.jpg20210710_113751.jpg20210710_113810.jpg

[Peter A]

Here is a vid taken on Saturday with a drone flown by fpv. First boat is my Albert Lee, you can see how windy it is, the chop was around 4", I could only go about half throttle on the back straight. The second boat is Graham Trucking, a new build also just new on the water getting dialed in. He had a bit less wind.

[Peter A]

Short vid from Saturday. Boat stopped because the motor wires melted. I suspect they must have cracked or something. Fortunately I had a TP 4060 930 kv motor so that went in and it runs awesome on that.

https://www.facebook.com/steve.trott.10/videos/371180821021269