Motor Rotation 1/10 Scale Hydro

[klloyd67]

When I ran 1/8 Scale nitro we ran with left rotation when looking at prop from transom. Do 1/10 scale FE guys do the same thing?

Thanks,

Kevin

[JimClark]

They turn left and use right hand props

[klloyd67]

So I need a right lay flex cable?

Sent from my VS985 4G using Tapatalk

[TRUCKPULL]

So I need a right lay flex cable?

Sent from my VS985 4G using Tapatalk

YES

Larry

[leonard feeback]

Offshore Electric has both flex shafts and props needed for 1/10th scale.

[klloyd67]

Question?, if the brushless motors can rotate left or right and there are more prop options for left rotation, why wouldn't I run left hand?

Sent from my VS985 4G using Tapatalk

[JimClark]

There used to be only a couple of RH props that would work but there are now quite a few to choose from. When the 1/10th scale first started in Seattle it was a bunch of Hydro Geeks that wanted to mimic the real Unlimited's and they turn left.

Question?, if the brushless motors can rotate left or right and there are more prop options for left rotation, why wouldn't I run left hand?

Sent from my VS985 4G using Tapatalk

[TRUCKPULL]

Question?, if the brushless motors can rotate left or right and there are more prop options for left rotation, why wouldn't I run left hand?

Sent from my VS985 4G using Tapatalk

If you want to run with the 10th class and turn left. You want a right hand prop.
If you run a left hand prop, you boat will not like it (very hard to turn left when spinning a left hand prop.
The prop walk helps the boat turn.

Larry

[klloyd67]

Thanks, little slow on hydro physics

Sent from my VS985 4G using Tapatalk