Turn fin

[Newboater]

Looking at the UL-1 upgraded turn fin that is 2mm think or kintec fin Hydro Turn Fin CNC machined aluminum. 67mm long and 42mm wide. $12. with upgraded bracket.

Basically looking for a good turn fin for a hydro that won't bend
Thanks

[TRUCKPULL]

David

Not enough info.
Hydro (Rigger) or Sport Hydro?
What size?
What power, 2S, 3S, #######12S ??
For racing or sport?

Larry

[Newboater]

Sorry would be for a popeye hydro 32" length 14.35" wide 4s or 5s, for fun

[kfxguy]

I have one I'll sell you....it comes with a free Popeye too. $350 lol

[TRUCKPULL]

Contact "ML BoatWorks"
Ask for a - Macomb Stainless Steel Sport 20 Turn Fin

Larry

[Newboater]

I have one I'll sell you....it comes with a free Popeye too. $350 lol

That is a good looking boat........

[Newboater]

Contact "ML BoatWorks"
Ask for a - Macomb Stainless Steel Sport 20 Turn Fin

Larry

Thanks for the info I have contacted them and am waiting for a reply, but it seems they don't have a mounting bracket for their turn fin according to the web page, what bracket did you use?

[Mxkid261]

Most people probably just make their own bracket. Pretty simple with some aluminum stock. I made 2 fin's identical to the ul-1 style, they work great but might be a little small for the popeye. The ML fin looks very nice. I may have to order one myself.

[Newboater]

Ul-1 comes with a bracket and kintec makes an upgraded bracket. Just not sure what fins would fit the Kintec one, I could make one not sure where to get the aluminum stock from.

[Mxkid261]

You could get the kintec upgrade bracket and the macomb turn fin, just drill a couple new holes if need be

[Newboater]

yes that is true.

[CraigP]

UL-1 Turn Fin Pic

I used a UL-1 Turn Fin. It is thin and had a bunch of bend in it. I made a brace for it. There is an aluminum plate glassed inside the boat to spread the load out.