Smokin Joe's

[Xrayted]

you're right, series wiring is bad.


I only do 100 laps a week

[ATTACH=CONFIG]177863[/ATTACH]

Of course wiring in series is fine. That was never the point of any of my replies to you. It was the incorrect claim by you that using different capacities was OK when using packs in series that me and other members were telling you was a terrible idea, starting with TS Davis in post #42.

Everyone here reading this knows what we were talking about and so do you, so dont waste your time now trying to change the narrative around to something it never was now that you are stuck with nowhere else to go

[Bande1]

Of course wiring in series is fine. That was never the point of any of my replies to you. It was the incorrect claim by you that using different capacities was OK when using packs in series that me and other members were telling you was a terrible idea, starting with TS Davis in post #42.

Everyone here reading this knows what we were talking about and so do you, so dont waste your time now trying to change the narrative around to something it never was now that you are stuck with nowhere else to go

what happens exactly if you run different size packs?

[ray schrauwen]

The reason why my series setup smoked was because the cells were not up to the task. I went cheap and used 5.5mm plugs with 4" of wire per pack. The motor was asking too much of them.

[MikeDunn]

Which yellow and purple from House of Colors did you use? The paint codes is what I am after.

Mike

[pescador]

Here?s what I used
IMG_0832.jpg

[pescador]

From the plans

IMG_0834.jpg

[MikeDunn]

Thank you! I have a 1/8th currently.

Mike

[MikeDunn]

Are you interested in selling your build plans/ paint decal plan sheet?