my new 1/8 scale Squire Shop neu 1527 1.5y

[meangenesracing]

not having very good luck running this boat. first time in the water jumped up right on plain ran great 1.5 laps and stopped got it back to shore did not change anything now it acts like its underpowered can't get on plane. the correct strut depth is even with bottom of sponsons is rhat a correct depth?

[meangenesracing]

I have a etti 220 speed control 10s lipos is it possible it is not running on the whole 10s?

[K.R.Joye]

What size prop?
Also is your CG setup to balance on front edge of turn fin?

Was anything hot or smelled funny when you brought it in 1st time it quit. I like those big Ettis have 3 of them. 0nly weak link on them is the short length of area battery leads are soldered on to the boards. They come on soldered if your taxing the controller sometimes.

[Doby]

Are you running 10s2P?

[RandyatBBY]

What prop are you running?

[meangenesracing]

2 5s packs, and a 450/3 prop

[meangenesracing]

What size prop?
Also is your CG setup to balance on front edge of turn fin?

Was anything hot or smelled funny when you brought it in 1st time it quit. I like those big Ettis have 3 of them. 0nly weak link on them is the short length of area battery leads are soldered on to the boards. They come on soldered if your taxing the controller sometimes.

Ken, everything was barely warm my cog is approximately 2" behind sponsons

[K.R.Joye]

That's a good prop, you have the 5S packs in series correct? Check your packs for dead cells and the battery leads at esc board solder joints.

[meangenesracing]

That's a good prop, you have the 5S packs in series correct? Check your packs for dead cells and the battery leads at esc board solder joints.

correct, in series, and I will check when I get home

[Doby]

specs on the packs??? Maybe your LVC is kicking in.

[Doug Smock]

He got it going fellas.

[meangenesracing]

He got it going fellas.

with a lot of help from Doug lol. so thanks to everyone who gave me input. I think I have one fast boat

[CraigP]

Fast or not, she's a beauty! Keep it looking good

[longballlumber]

Soooo..... what was it controller settings?

[meangenesracing]

Soooo..... what was it controller settings?

I believe the strut was not correct. I did unhook the speed control and rehook it maybe it could have had a loose connection