Dumas Eagle

[Moonie]

IMG_1538.jpg

[ATTACH=CONFIG]149430[/ATTACH][ATTACH=CONFIG]149431[/ATTACH]

This is the old eagle I have. It's not as fast. Can anyone see a difference here?

[Moonie]

This I have to see.


.

This old eagle that's made different will not go 70 mph. IMG_1539.jpgIMG_1540.jpg

[Moonie]

Beautiful job on the restoration Moonie.

You and your boats motivate me. Thanks!

[Moonie]

Beautiful job!!! Definitely a lot of surface area, and wide transom, but the walls of the tunnel don't look that deep to me. Maybe it doesn't trap as much air as we think. Looking forward to the video.

Thanks. It almost completed and we can all see what it can do.

[785boats]

You and your boats motivate me. Thanks!

That is a truly humbling comment. Thank you.

I am certainly looking forward to some vision of this boat on the water.

[Moonie]

IMG_1564.jpgIMG_1558.jpgIMG_1559.jpgIMG_1560.jpgIMG_1562.jpg

[Moonie]

IMG_1566.jpgIMG_1567.jpgIMG_1568.jpg sponsons on this one are almost 1/2 inch shallower than my old eagle.

[Moonie]

https://m.youtube.com/watch?v=HLoT1z4-gAs

This is the first run. It looks like it can handle more speed to me.

[Moonie]

This I have to see.


.

I'm about to prop up to a 455 and do 70mph rite fast.

[42fountain]

Great job on the build and it runs awsome..

[TRUCKPULL]

In the video it looks to run very stable.
From the roster tail it looks to have some good speed in it.
We don't know the size of the oval you were running on, looks to be close to a 1/6th coarse, and you were doing 10 to 11 second laps.
Very nice

I know earlier you said 8S, what is the rest of your setup? Motor, ESC, etc.?
Larry

[Moonie]

In the video it looks to run very stable.
From the roster tail it looks to have some good speed in it.
We don't know the size of the oval you were running on, looks to be close to a 1/6th coarse, and you were doing 10 to 11 second laps.
Very nice

I know earlier you said 8S, what is the rest of your setup? Motor, ESC, etc.?
Larry

Thanks.
Neu 1521 1.5y 1050kv
8s1p 160 amp esc
5200mha x2
cut x450

[TRUCKPULL]

Antonio

Looks like a good combination for your setup.

What make is the ESC - 8s -160amp??

Larry

[ray schrauwen]

Could be the HW HV 130Amp 5-12s esc.

https://www.offshoreelectrics.com/proddetail.php?prod=ker-seaking-130-hv-v3

[Moonie]

Dynamite marine 160 HV 8s