ML Boatworks THX-305, 30.5" Outboard Tunnel hull design/ build

[cybercrxt]

Cowling plug is moving along. Got the foam in, and glass coat added. Next I will sand, add filler, and prime, and see where its at!

[cybercrxt]

Plug is getting closer:

[cybercrxt]

Cowling plug getting close.

[cybercrxt]

Finished the cowling plug for the THX305 tunnel! Mold should happen this week.

[cybercrxt]

The THX-305 cowling plug is now almost ready. I added the parting board, and cleaned up the base connection, and got another Duratec coat added this weekend. I should have this plug done this week. Mike

[rayzerdesigns]

U are the man

[cybercrxt]

Finishing up the mold this weekend for the cowling. Wont be long!

[cybercrxt]

First cowling is out of the mold, and its slick as glass! Mike

[cybercrxt]

Aright, Here it is! Looks so freakin sweet. I cannot wait to get this one up and running! Mike

[cybercrxt]

Also, This is the reason anyone can handle building this hull easily. Its pretty hard to mess up the sponson to center section bonding with the dowel and loop technique. it forces a 90 degree angle with the center section to inside sponson edge.

[Darin Jordan]

Simply BEAUTIFUL WORK!

[Shooter]

I agree. You certainly have mastered the trade. Looks great.

[cybercrxt]

Thanks guys!

[rayzerdesigns]

Get it done yet

[cybercrxt]

Heck no, always something going on. its on my workbench waiting to receive the top decks and epoxy tho.