Tweet
Hi all couple of weeks ago while shuffling through some old boat plans i found a set of Dave Frank 1/16 scale Miss Rock plans which where purchased years ago. The hull measure's 21 1/2'' in length and a 11 3/4'' beam decided to substitute 1/8 balsa sponson and center section sides for 3/32'' birch plywood and 1/8'' balsa sponson frames for 3/32'' basswood. For power i was thinking 28 mm dia inrunner motor on 2s or 3s ? Has anyone set-up a Miss Rock for brushless power? Any sugestions welcome? Regards Andris Golts.
Comment