Miss Excite Hydro Thread

[Joe007]

sporthydrofan I just bought a Miss Excite and will be using the stock motor/esc what is the best prop to get for it in a 3 blade metal prop.
I want some more speed out of it. I will be running 3s and 4s lipo's.
Joe

[Scamp73]

Can this boat handle 5s without any mods? Or what have you guys found to be the best battery set up?

[BILL OXIDEAN]

Can this boat handle 5s without any mods? Or what have you guys found to be the best battery set up?

She doesn't want 5s on the stock system. I have a 5s system that propells it to about 80+

http://www.youtube.com/watch?v=H4PadPAK-Ls

[BILL OXIDEAN]

sporthydrofan I just bought a Miss Excite and will be using the stock motor/esc what is the best prop to get for it in a 3 blade metal prop.
I want some more speed out of it. I will be running 3s and 4s lipo's.
Joe

On 3s or 4s you will do well with the venom red 36mm cnc prop
Or, my uncle runs a V937 sharpened and ballanced and the thing blasts off..

[Scamp73]

Great, thanks for the response. Literally at the lake about to put it in.

[Shun Tung]

Hi bill,
Why you need red venom 36 mm 1.4 p prop ? I seem this item was discontinues in atomik web suite . But I seem
another one same size and pitch prop only is silver Aluminium. What's diffrence between of this two prop effect ?
Please advise ! Thanks !!

[BILL OXIDEAN]

The red one may be a bit more durable, but the silver one is just fine! : )

[Shun Tung]

Noted with thanks Bill . Can I asked you one more question ? I seem your miss excite is really very fast .
Did you change the motor and special setting ? If you don't mind , please teach me how can I improve my miss
Excite more speed and stable running in the lake . Thank you so much !!!

[dlhcon]

I have a Red Evo i am willing to sell.

[Shun Tung]

Any master can be advise me if I change the motor on this boat . The 3650 1800 kv inrunner or H3126 2200kv outrunner motor which one is better on the speed ? I tried to put proboat 1800 kv inrunner motor in this motor mount . But this mount is too small. Any same size motor mount plate but the hole is fit 3650 size motor ? Please
advise !! thanks