adjustment Help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Deepvee
    Member
    • Sep 2013
    • 52

    #1

    adjustment Help

    I have added a set of trim tabs and also replaced my strut. All seems well except when I go full out the boat goes on edge to the right side.

    Is this what is known s torque roll?? Should I be adjusting the trim tabs or my strut?
    Traxxas Spartan
    Traxxas Blast
    ABC Hobbies Super Hawaii
  • Make-a-Wake
    FE Rules!
    • Nov 2009
    • 5557

    #2
    Your boat is most likely running wet and the torque roll from the prop tilts it a bit which is then magnified by wet running. Take your tabs up a bit.
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

    Comment

    • PowerDemon
      Senior Member
      • Oct 2013
      • 351

      #3
      Also adjust the strut up about 2mm. I found that when I put my strut too low the boat would torque roll.
      37" Fightercat Shocker powered by Neu 1530 on 10S

      Comment

      Working...