Sexy SpeedMaster Trim Tabs

[Deepvee]

Has anyone installed the SpeedMaster trim tabs? These are slightly larger in size(2inch) but will fit fine. These would require drilling through the hull with nuts and bolts though I believe? Any thoughts....



http://www.offshoreelectrics.com/pro...d=ros-spdt-502

[Spartanator]

Can I assume you mean this one: http://www.offshoreelectrics.com/pro...d=ros-spdt-502


They are nice But I like the new ones they just came out with... http://www.offshoreelectrics.com/pro...prod=ose-83020

They are very nice but I would prefer the ones in my post (see second link). IMO tabs don't need to be as wide as some.

[Deepvee]

Thanks for the correction. Yes those are the ones. I fixed the link. Do the new ones fit the factory holes?

I might just go with the speedmasters. What's the best thing to use on the holes for a proper sealant?.. I heard GOOP is the best

[Spartanator]

I'm not sure if you have to drill new holes but probably.... If you were going to spend $50+ why not get the ones in the Spartan upgrade section? Then you could have 4!
If you have a Marine Shop around call them and ask what sealant you should use. Maybe even shoo-goo would work for this?