TRAXXAS spartan help

[CHUD]

Ok bud's I'v picked up a new Traxxes spartan from slowride ,I do not know anything about them,I know it 36long and 9'' 1/2 wide has anyone ran this think stock,and if so what motor went in it,and speedcontrole a link to get them would be nice to,And if anyone has info on a motor that will move the boat at least 50 and 60mph please drop me a line,

[martin]

If you go further down the page to RTR theirs a dedicated section re the Spartan to which theirs lots of info on stock through to modded Spartans, Probably the best place to ask about the Spartan as well. Martin.

[CHUD]

If you go further down the page to RTR theirs a dedicated section re the Spartan to which theirs lots of info on stock through to modded Spartans, Probably the best place to ask about the Spartan as well. Martin.

Thanks martin sounds like a good idea can someone move my thread to the spatan section thanks

[Stinger9D9]

Here's a brief overview of how the Traxxas Spartan upgrade path goes:

- run the stock motor/esc on 6s (or even 4s) until it burns up, if it doesn't catch the boat on fire and sink it (which has actually happened!)

http://www.youtube.com/watch?v=Ztr4yJxYAz4

- Then replace the motor and speed control with something of better quality (hopefully the Castle combo provided under warranty by Traxxas), run that faster and faster until you stuff the boat into a wave, in which case, this may happen
http://forums.offshoreelectrics.com/...axxas-Spartan&

- then replace the hull (might as well replace the cheap hardware while you're at it) with a hull made of fibreglass that can withstand some speed, then...

You'll pretty much have replaced the whole boat...you will still have the original radio though.

Just sayin...this is how things seem to go with this boat.

Here's a far better starting point:
http://forums.offshoreelectrics.com/...axxas-Spartan&

(Cheaper too)

[HYDROJERRY]

A Spartan,,,,, what the,, dont you have a DF to build??? dont hurt yourself Chud,, yep RC's are like laddies, once you get one you want more and more until they hurt you!!!

[CHUD]

A Spartan,,,,, what the,, dont you have a DF to build??? dont hurt yourself Chud,, yep RC's are like laddies, once you get one you want more and more until they hurt you!!!

Ya bra I really like the look of the blue spartan,should of had jeff punch me out a decal;s like that for the DF33 IN GREEN,

[CHUD]

Here's a brief overview of how the Traxxas Spartan upgrade path goes:

- run the stock motor/esc on 6s (or even 4s) until it burns up, if it doesn't catch the boat on fire and sink it (which has actually happened!)

http://www.youtube.com/watch?v=Ztr4yJxYAz4

- Then replace the motor and speed control with something of better quality (hopefully the Castle combo provided under warranty by Traxxas), run that faster and faster until you stuff the boat into a wave, in which case, this may happen
http://forums.offshoreelectrics.com/...axxas-Spartan&

- then replace the hull (might as well replace the cheap hardware while you're at it) with a hull made of fibreglass that can withstand some speed, then...

You'll pretty much have replaced the whole boat...you will still have the original radio though.

Just sayin...this is how things seem to go with this boat.

Here's a far better starting point:
http://forums.offshoreelectrics.com/...axxas-Spartan&

(Cheaper too)

Vary good point bud ,but what if I can fix all that with a little class in the hull,I have not got the hull yet but it should arrive tomorrow

[CHUD]

Ok bud's just got my spartan and yes you are all right the hull is vary thin,BUT I an going to build it anyway just for fun

[Stinger9D9]

Ok bud's just got my spartan and yes you are all right the hull is vary thin,BUT I an going to build it anyway just for fun

Here you go. Instructions from Randy at BBY on how to reinforce an ABS hull with carbon fiber from a couple years back.

http://www.rumrunnerracing.com/feforums/showthread.php?t=22508

If you do this to the hull, it'll be light and strong. It's a fair amount of work, but it sure would pay off.

[CHUD]

Here you go. Instructions from Randy at BBY on how to reinforce an ABS hull with carbon fiber from a couple years back.

http://www.rumrunnerracing.com/feforums/showthread.php?t=22508

If you do this to the hull, it'll be light and strong. It's a fair amount of work, but it sure would pay off.

Thanks bud that helps out alot

[HYDROJERRY]

what no pics!!!!!

[CHUD]

Alright bra here's one beside my df33

[HYDROJERRY]

Sure does look cool thow!! put some fiberglass cloth in there or carbonfiber cloth and it will be stronger..

[CHUD]

I here ya bra but where o where can I find that alsome spartan decal that everyone has on the side

[jj2003]

I here ya bra but where o where can I find that alsome spartan decal that everyone has on the side

Available on fleabay or from traxxas website. I have one that I'm doing a custom 2 tone paint job on. I burned up the original motor and ESC using 2 venom 3s packs in series and sent it in to traxxas for warranty. Steve Lindholm handled my return ( a great job by the way) and I had the new Castle setup in about a week. The customer service has gotten much better. On the stock 7.4 Nimh's, the new hardware barely got hot. When I'm finished with the paintwork, I'm going straight to 6's and see how she handles.