my flex cable is done help please

[Boss777]

also am i gona need that plastic tube ? or just install it in that coper one without it? if i get that .187 from Jeff's store ?

[dag-nabit]

If you go with the .187 cable you won't need the teflon liner, the larger diameter cable won't fit with the liner installed. Just keep it greased up good.

If you go with the .078 wire drive, then you should put in a new piece of liner.

Kevin

[Boss777]

If you go with the .187 cable you won't need the teflon liner, the larger diameter cable won't fit with the liner installed. Just keep it greased up good.

If you go with the .078 wire drive, then you should put in a new piece of liner.

Kevin

thanks the coper one called traxxas and they said they will send me one

but i need need that .078 also how do i mount the flex cable to shaft ? do i use glue or something?

[Boss777]

i need need that .078 also how do i mount the flex cable to shaft ? do i use glue or something? if so what kind where can i get it ?

[dag-nabit]

i need need that .078 also how do i mount the flex cable to shaft ? do i use glue or something? if so what kind where can i get it ?

The shaft will come mounted to the flex cable or wire drive. Be sure to order the correct collet to fit the flec cable or wire drive you choose.

Kevin

[Boss777]

i just got coper tube from traxxas and i need stock flex now any one has one?

[rlpowley]

I need to get a .078 wire drive for a 3/16 prop from Jeff Wohlt. Does anyone know how to reach him? Thanks!! Rob

[1truckerdan]

Fighter cat has them in stock for less than $15

http://fightercatracing.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=78&category_id=24&option=com_virtuemart&Itemid=56

You have to sign in to see the prices

[Rcforever27]

You can try that or try www.wohltsrcboats.com....

[Boss777]

I need to get a .078 wire drive for a 3/16 prop from Jeff Wohlt. Does anyone know how to reach him? Thanks!! Rob

email him i did and he resonded but the pars i need is .078 to for spartan

[Boss777]

i just called one of the site and they have one in stock the original traxxas spartan flex and shaft and they said they are recall they been defective and now traxxas make new once


i need help hear i got original flex cable and it came out from shaft does any one knows what glue to use or welder

[martin]

Most shafts that are bonded are done with Loctite 603, A few use Loctite 638 that has a slightly stronger bond but is not oil tolerant.

[Rumdog]

Just buy a .187" cable from OSE and be done with it..

[Boss777]

Just buy a .187" cable from OSE and be done with it..

i want to but then i need to get that mount that goes on motor and probable drip out holles which i dont want to do it couse i might use different flex in the future

[Boss777]

Just buy a .187" cable from OSE and be done with it..

coupler is what its called or will .187 work with original coupler ?
i don't mind drilling bigger holes