
Stock Spartan Hit 50.7 MPH today...
Collapse
X
-
Yes your correct, not only did the solder come off the ec5 plug, but it also came off from the actual traxxas battery. The heat was so intense that after the video the Black cable on the battery ended up on the floor. so both my solder and the factory traxxas solder gave up.Comment
-
What are you talking about??? You burnt your 1st esc up before it ever even seem water and now within a month either another esc or motor this time not to mention your temp sensor on your reciever wigged out so traxxas sent you another one. Granted they seem to take care of there customers but who wants to buy something that works a month at a time and then wait to fix it and do it all over again.... get it fixed sell it and but an mg or genesis or a custom v something that has been provenmiss gieco cc 1518 62.1mph [/COLOR][/B] Delta Force 33" cc 1717Comment
-
Well I am in Panama and I really dont plan on sending it back. I will not use it again and even to sell it on ebay the shipping cost add up.
I already got my turnigy 180amp ESC and a tacon 1700kv and a neu-castle 1717 5mm shaft. Am going to try first with the tacon to se how it goes. and then am going to take my EC5 plugs of the ESC, and finaly tape how I take a sledgh hammer to the venelion ESC.Comment
-
Maybe with this boat I can understand the frustration but traxxas has put out some nice vehicles which I've owned and own. I won't go to mcdonalds and order a taco just because they sell it but I also dint think that it was gonna be this....badmiss gieco cc 1518 62.1mph [/COLOR][/B] Delta Force 33" cc 1717Comment
-
I've owned n stampede n rustler n vee and villain and looking back after buying Losi and AE trucks and pb boats they were all a let down plastic toys with under powered motor I won't buy again did I forget to mention 4vxl escs I burnt upComment
-
Well I am in Panama and I really dont plan on sending it back. I will not use it again and even to sell it on ebay the shipping cost add up.
I already got my turnigy 180amp ESC and a tacon 1700kv and a neu-castle 1717 5mm shaft. Am going to try first with the tacon to se how it goes. and then am going to take my EC5 plugs of the ESC, and finaly tape how I take a sledgh hammer to the venelion ESC.Comment
-
yea traxxas droped the ball so hard it popped on this one every time i run mine with my 3s after 5 maybe 7 mins the heat protect cuts on and the motor is soo hot i nearlly burned my self a couple time but i let it cool throught it back out there and then the batts die so yea but it has stopped working.....yetComment
-
I never thought twice about getting a Spartan based of how great the villain was! I had to send my old XL1 esc in 3 times on the stock setup from it going poof until the warranty was up! Then I used a drill trigger and a servo and it never failed. Then the motors started to go bad! So I used cheap drill motors and got half again as much speed with components from 2 $20 18v drills which is less than traxxas charged for a new (crappy) esc at the time. And this was also faster than the Villain EX that came out a couple years after I did the mod. So after that I was done with traxxas. Especially in the boat department.
I would feel better getting a cheap boat from HK and modding it. The only boat I bought from HK was the surge crusher and went 40mph out of the box of 4s and got around 50 runs on it until I modded it. It comes as a crap box but was way more dependable than my villain ever was. I have less money in it than the cost of a Spartan and will run over 50 all day long with no problems.Last edited by Jacked1; 04-15-2011, 02:25 AM.Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover bargeComment
Comment