Leopard 4082 1500KV

[dag-nabit]

I can say Traxxas, but I try hard not to

I was referring to the Turnigy/Seaking ESC's in particular, and most ESC's in general.

One (hopefully) can assume the ESC in the Spartan is the exception, not the rule.

Kevin

[Diesel6401]

The Castle HV and ICE. Those things are like 300 and up. I dont have it in me to spend that kind of dough on a speed control to go 10mph faster. just me though

Fast, Cheap or Reliable.... Choose 2!

D just plays things on the more safe side..

BINGO!




I rather spend the money up front on a esc that can handle the loads. My thinking is You run a t180 on 6s (been done before by many people some ok some not ok) so you have your $100 esc and your $100 motor. Esc goes poof on 6s possible taking the motor out with it. $200 up in smoke. Now you have to spend say another $200 just to get the same setup you had before, Your at $400. I buy a $300 esc & a $100 motor it's still $400 but my boat doesn't smell burned poop lol.... Just my thinking...

[Shaun78]

got a point. i havent heard of anyone here burning up a T180 yet but I am new to this

[Diesel6401]

got a point. i havent heard of anyone here burning up a T180 yet but I am new to this

It's happened. If you do a detailed search you may find some info of it happening, I heard about on a few occusions a while back on this site and others. They are AWESOME esc's they truly are, but like anything when you push it too it's absolute max things can happen and reliability goes down.

[Brushless55]

I rather spend the money up front on a esc that can handle the loads. My thinking is You run a t180 on 6s (been done before by many people some ok some not ok) so you have your $100 esc and your $100 motor. Esc goes poof on 6s possible taking the motor out with it. $200 up in smoke. Now you have to spend say another $200 just to get the same setup you had before, Your at $400. I buy a $300 esc & a $100 motor it's still $400 but my boat doesn't smell burned poop lol.... Just my thinking...

I'm starting to think about putting in better esc's with higher V rating, so as to have head room in the esc..
What about this esc?
240V 12s
http://www.hobbyking.com/hobbyking/s...dProduct=12442

I'm thinking of this for my Thundertiger with a CC1717..
I will mostly run 5s and 6s, but I do want to run up on 8s from time to time just to make the gas guys

[Diesel6401]

I'm starting to think about putting in better esc's with higher V rating, so as to have head room in the esc..
What about this esc?
240V 12s
http://www.hobbyking.com/hobbyking/s...dProduct=12442

I'm thinking of this for my Thundertiger with a CC1717..
I will mostly run 5s and 6s, but I do want to run up on 8s from time to time just to make the gas guys

That esc is this esc: http://www.offshoreelectrics.com/pro...ef-sword-240hv

[Brushless55]

That esc is this esc: http://www.offshoreelectrics.com/pro...ef-sword-240hv

Oh wow!
I'm helping a friend build a 41" Cat on 10s and we were going to buy that esc but Steven is out of stock
so that's a good one then?
maybe I'll get two, one for him and one for my Thundertiger

[Shaun78]

Now I think I want a 4082 1600kv. Why r these motor hard to find?

[dag-nabit]

Now I think I want a 4082 1600kv. Why r these motor hard to find?

Increased demand due to all the Spartans being upgraded??

Or just general increase in sales with the return of spring/summer.

Kevin

[JPriami]

because i bought stock on leopard hobby.. lol

wish so

[dag-nabit]

because i bought stock on leopard hobby.. lol

wish so

Speaking of Leopard Hobby, I notice they are getting their site back in order with more data pages now available again.

Also seem to have a lot fewer models available, or maybe just not updated on the site yet.

Kevin

[dag-nabit]

Just an FYI for those interested in the Leopard 4082 1500kv.

I ordered a Leopard 4082 1600kv and received the communication below from HiModel prior to them shipping.

What it comes down to is Leopard Hobby is re-badging the 4082 1500kv as a 1600kv motor.

So when the next batch leaves the factory in a few weeks they will be marked as a 1600kv motor, but actually nothing has been changed, still the same motor as the 4082 1500kv.

Kevin

Before shipping the order, we need your confirmation on the KV of the motor, the one we have in stock now is marked 1500KV, but it will be marked as 1600KV since next batch, please confirm will the one marked 1500KV will be ok with you? (As notified by the manufacturer that 1600KV will be marked since next batch, so we change our website specs to 1600KV, and only changed back to 1500KV today to avoid confusion like this)

Please confirm if we can go ahead to ship the one marked 1500KV, if not, then please advise what do you prefer to deal with the order, it may take several weeks till the one marked 1600KV to be available in stock (the motor actually not changed, only because the motor is more close to 1600KV than 1500KV, so they want to mark it as 1600KV instead)

Sorry for the inconvenience.
Apr,11,2011

[JPriami]

Thats loco essay
Hey man you want to buy my Mercedes? Dont mind that kia logo on there it looks just like that kia but its a Mercedes man.

[mavdriver]

Loco indeed LOL

[spartanonfire]

I think I need one of these 4082 1500/1600 motors. Any idea when they will be restocking?