Battery Tray

[Chilli]

If it fails again. Try Goop. It's flexible, fills gaps and bonds tenaciously.

[Banzee]

If it fails again. Try Goop. It's flexible, fills gaps and bonds tenaciously.

Oh thank's for the tip ! I will this weekend ! Do Goop got several type of glue , or just one ??

[Chilli]

Just the standard one is fine. It's pretty good on pool noodles (for flotation) also. :)

[ChevyPrerunner]

I agree, Goop is great and in my case has worked better than JB Weld!! I have used the Marine Goop and Extreme Goop both with excellent results.

[Banzee]

Thank's guys for your help !! I found the Goop glue on the web , seem to be available at HomeDepot and Canadian Tire in Montreal , so i will check that.


Tomorrow , i will test my setup with the glue I already put and see if she do the job ! Because race and fast speed it is not what i like , more choppy water and waves rides , so the hull got a lot of shocks, but i rarely go over 30 mph . Big St Lawrence river rarely be calm as glass, most of the time , we have wind of 10 mph plus !!!!

[Banzee]

Hi Guys , i did 4 runs this after noon and the tray stayed in place !

[Banzee]

After almost 15 runs later , the battery tray stay in place , i used the extra thick maxi cure from BSI . Look good !