Installing OSE Upgraded flex cable........

[TAMonti]

How do I remove the stock Teflon tube???

[de-pro]

Take the motor out. with the flexshaft press against the tube from outside inwards

[TAMonti]

Anyone know what size Allen wrench fits the set screw in the drive dog on the OSE cable??

[LarrysDrifter]

Probably a 1.5 or 2mm. Go to your LHS and get a set of allen drivers. Standard "L" shaped allens wear quickly and easily strip.

[Steven Vaccaro]

.050 http://www.offshoreelectrics.com/pro...rod=dh-dyn2910

[TAMonti]

Thanks!!
I'm guessing Steven is correct. The set screw is MUCH smaller than a 2mm or even a 1.5mm. (Which I already tried)

[LarrysDrifter]

Thats cool. I didnt know OSE sold those. Sorry, Steve.

[Steven Vaccaro]

Thanks!!
I'm guessing Steven is correct. The set screw is MUCH smaller than a 2mm or even a 1.5mm. (Which I already tried)

I hope I'm correct.

If not I have about 1000 or more worth of cables out in the market that we have been using the wrong driver on.

Another words i can assure you that the oc6dmm drive dog takes a .050 driver.

The larger drive dog, oc6dm takes a 5/64 driver. I will add that info to the drive dog info.

Also I've never had good luck with the smaller L shaped allen wrenches with small grub screws. they usually just strip the screw. The larger stuff they would just fine on.