Tweet
Hello all, my wifes UL-19 is on its 2nd replacement strut due to highly worn bushings, I can't locate replacement bushings, and would rather prefer a strut that uses the tried and true octura bushings.
Current setup
GOOLRC 1500kv 4 pole 3680
CC MMX8s set to 75% limit with stock timing
8s1p GensAce 6k mah 100c packs
X445 s/b prop
Next change is replacing the CC controller with a spare schulze 32.115, and I might move her to a lehner 1950, but these older GOOLRC motors are quite amazing little motors for the cost.
IMG_20210415_123832714.jpg
8slog001.jpg
Current setup
GOOLRC 1500kv 4 pole 3680
CC MMX8s set to 75% limit with stock timing
8s1p GensAce 6k mah 100c packs
X445 s/b prop
Next change is replacing the CC controller with a spare schulze 32.115, and I might move her to a lehner 1950, but these older GOOLRC motors are quite amazing little motors for the cost.
IMG_20210415_123832714.jpg
8slog001.jpg