spacer

**Alfa Spirit** · 01-14-2022, 07:52 AM

Use a nylstop screw, not this purple bullet.

**Notch-R** · 01-14-2022, 10:22 AM

i use the screw then the bullet on the stock prop.the aftermarket has a shorter hub.20220114_091858[365].jpg

**Notch-R** · 01-14-2022, 10:24 AM

why do the pictures post sidways?

**NativePaul** · 01-14-2022, 05:21 PM

Use a piece of fuel/water cooling tube as a spacer.

**Alfa Spirit** · 01-15-2022, 06:58 AM

You can reduce the flexshaft lenght.

**Notch-R** · 01-15-2022, 10:54 AM

then the stock style prop won't work

**Notch-R** · 01-16-2022, 03:07 PM

**Notch-R** · 01-16-2022, 03:08 PM

i need the spacer shown above

**koen** · 01-19-2022, 07:07 AM

you can fill the gap with peek rings(it's a kind of teflon)it gives also no problem with the balance of the propshaft (tfl sells them)

**Notch-R** · 01-20-2022, 01:40 AM

i found one here at the ose store

Comment