Steve, you need a new forum! Proboat Stiletto

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Darin Jordan
    Fast Electric Addict!
    • Apr 2007
    • 8335

    #31
    Originally posted by rchippie
    The add says you use two 2s packs . Can you use a single 4s instead, or will it effect the handling of the boat ?.
    I tested the boat with both two 2S packs, and a single 4S pack. ThunderPower 40C 5000 mah hard case packs in both cases. Balance point was nearly identical, and the handling was good in both cases. That was also with the original, prototype outboard, which was much heavier than the final production unit, so I expect using a single 4S pack should work even better on a production boat.

    I'm hoping my boat will be here sometime this week. As soon as it's here, I'll do my typical thread with pictures and more info.
    Darin E. Jordan - Renton, WA
    "Self-proclaimed skill-less leader in the hobby."

    Comment

    • Boatman
      Senior Member
      • Jan 2008
      • 796

      #32
      It states it is a bind-n-drive package. Do you know what rx unit will be factory installed? It also states it will be usable with the 2.4ghz specktrum.

      Comment

      • AndyKunz
        Fast Electric Addict!
        • Sep 2008
        • 1437

        #33
        You can use a 4S pack but it moves the CG forward a little.

        They actually discuss this on the podcast from last Thursday (5/27) http://www.horizonhobby.com/Podcasts/

        Andy
        Spektrum Development Team

        Comment

        • AndyKunz
          Fast Electric Addict!
          • Sep 2008
          • 1437

          #34
          MR3000 receiver.

          Andy
          Spektrum Development Team

          Comment

          • rchippie
            Senior Member
            • Jan 2010
            • 567

            #35
            Originally posted by AndyKunz
            You can use a 4S pack but it moves the CG forward a little.

            They actually discuss this on the podcast from last Thursday (5/27) http://www.horizonhobby.com/Podcasts/

            Andy
            Andy i have the spektrum pro module for a m8. Will the marine reciver work with that module ?. I tried to listed to the pod cast. But you have to listen th the whole thing. You can't adavance to the portion of the show with the boat talk. Can you touch on what they said ?.

            Comment

            • Darin Jordan
              Fast Electric Addict!
              • Apr 2007
              • 8335

              #36
              Originally posted by AndyKunz
              You can use a 4S pack but it moves the CG forward a little.

              Andy
              I will do a full writeup and posting of pics for everyone once I get the boat in my shop. That way the weight of all the components will be as produced. The outboard I originally tested with was a bit heavier than the production unit is, so we'll see where the final battery positions end up. LOTs of room in the battery box to shift things around...

              I'm hoping it'll arrive today.
              Darin E. Jordan - Renton, WA
              "Self-proclaimed skill-less leader in the hobby."

              Comment

              • JimClark
                Fast Electric Addict!
                • Apr 2007
                • 5907

                #37
                you can right click and download it to your mp3 player

                Originally posted by rchippie
                Andy i have the spektrum pro module for a m8. Will the marine reciver work with that module ?. I tried to listed to the pod cast. But you have to listen th the whole thing. You can't adavance to the portion of the show with the boat talk. Can you touch on what they said ?.
                "Our society strives to avoid any possibility of offending anyone except God.
                Billy Graham

                Comment

                • rchippie
                  Senior Member
                  • Jan 2010
                  • 567

                  #38
                  Originally posted by JimClark
                  you can right click and download it to your mp3 player
                  I do not have a MP3 player .

                  Comment

                  • JimClark
                    Fast Electric Addict!
                    • Apr 2007
                    • 5907

                    #39
                    well then you can download it to your computer and play it and adjust it to whatever portion you want to listen to
                    "Our society strives to avoid any possibility of offending anyone except God.
                    Billy Graham

                    Comment

                    • lussorocuztoms
                      Member
                      • May 2010
                      • 53

                      #40
                      hey fellas, new to the board here, anyhow been following this thread since it started AWSOME boat, just wondering a few things, video is great love the speed and the handling of the boat, what size is the can of the motor ? 540 550 just wondering about possible upgrades for a little more speed or can a 5s be run with this set up?
                      also since im new to boats, does the esc run an external BEC like 1/8 E buggy or truggy?

                      Comment

                      • Doby
                        KANADA RULES!
                        • Apr 2007
                        • 7280

                        #41
                        Welcome to the board. Best to run it stock and learn to drive it before updating. It should be plenty fast for just about anyone.

                        Excessive speed is not always your friend.
                        Grand River Marine Modellers
                        https://www.facebook.com/search/top/...ne%20modellers

                        Comment

                        • tomstoys2
                          Senior Member
                          • Jun 2008
                          • 581

                          #42
                          This is going to be very cool. Comes with an MR3000? That rocks! I've had my DX3S for 2 weeks now and I love it!
                          Can't wait to get my hands on that outboard. I already have a few other boats I want to try it out on.

                          Comment

                          • electric
                            Fast Electric Addict!
                            • May 2008
                            • 1744

                            #43
                            Originally posted by Darin Jordan
                            I will do a full writeup and posting of pics for everyone once I get the boat in my shop. That way the weight of all the components will be as produced. The outboard I originally tested with was a bit heavier than the production unit is, so we'll see where the final battery positions end up. LOTs of room in the battery box to shift things around...

                            I'm hoping it'll arrive today.
                            Darin, is makes sense that you would get the boat sooner, just hoping yours comes as part of a larger shipment !! chuckle. The long wait until the end of June begins.......maybe , just maybe it will come sooner than stated???

                            Comment

                            • Brushless55
                              Creator
                              • Oct 2008
                              • 9488

                              #44
                              Will this boat bind to a DX6i ?
                              cuz I do have that radio and that could work
                              .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                              Comment

                              • mike robson
                                Senior Member
                                • Apr 2010
                                • 430

                                #45
                                got mine on order will be here soon as it hits the LHS i get the first one.

                                Comment

                                Working...