Hi all i just bought a mystic and figured i say hello this is my first electric boat but not my first boat as i previously owned two 1/12 miss buds that were nitro
New mystic owner here
Collapse
X
-
Hey Gators fan, congratulations and welcome! I havnt been a member here long and Ive only had one other boat before my mystic. Ive got about 6 or 8 runs on it and really like it. Theres allot of knowledgeable people on here and its a great resource. Good luck and have fun! -
Just some friendly advice, avoid running 11.1v LiPo batteries in the mystic! I ran 5000 Mah 11.1v Li-Po batteries and my Mystic ESC exploded. The new ESC that I ordered is the New 80 Amp, (thats sold in the BlackJack 29). with 5000Mah 7.4v Li-Po batteries I was getting 35mph, and the 11.1v's I was getting 48.8mph. (ESC's aren't cheap)Comment
-
Just some friendly advice, avoid running 11.1v LiPo batteries in the mystic! I ran 5000 Mah 11.1v Li-Po batteries and my Mystic ESC exploded. The new ESC that I ordered is the New 80 Amp, (thats sold in the BlackJack 29). with 5000Mah 7.4v Li-Po batteries I was getting 35mph, and the 11.1v's I was getting 48.8mph. (ESC's aren't cheap)Comment
-
Just some friendly advice, avoid running 11.1v LiPo batteries in the mystic! I ran 5000 Mah 11.1v Li-Po batteries and my Mystic ESC exploded. The new ESC that I ordered is the New 80 Amp, (thats sold in the BlackJack 29). with 5000Mah 7.4v Li-Po batteries I was getting 35mph, and the 11.1v's I was getting 48.8mph. (ESC's aren't cheap)
SeanComment
-
I am very new to the RC boat scene and just bought a Mystic. I understand cars but a novice at boats. Can anyone give me advice on a basic setup for what I will need? Batteries, charger, connectors etc..? What do I need to watch out for? Any advise is very much appreciated! Thanks in advance.Comment
-
I just redid all the electrical connectors on my Mystic(first rc boat too) to 5.5mm bullets. The deans were soldered on like ish. I would guarantee one wire would have definitely unsoldered on me while running. I also changed over the 3.5mm bullet connectors on the motor to 5.5's as after seeing the soldering job on the deans I wanted all new joints done by myself. Batteries I'd look for some 2s1p 5000mah 40c+ batteries and as for a charger your budget is the biggest dictator of what to recommend. I went with a Thunder Power 820CD as I wanted a charger that would last me and be reliable. I came from dual CE turbo 35 GFX's and I wanted a quality charger to get back into the electric game.Comment
-
Drammen rock CityComment
Comment