Tweet
Here is a couple pics of how I did it , it could easily be done with a SpeedMaster rudder or cheap knock off.
I glued a piece of marine ply inside the hull for strength and bolted the new and old bracket together as well.
That part seemed like over kill , but I'm not to sure how strong the transom is and bolting the two together removed a lot of stress on the new bracket and transom.
Tim K
I glued a piece of marine ply inside the hull for strength and bolted the new and old bracket together as well.
That part seemed like over kill , but I'm not to sure how strong the transom is and bolting the two together removed a lot of stress on the new bracket and transom.
Tim K
Comment