What Prop to use with standard setup

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gary Cape Town
    Junior Member
    • Mar 2011
    • 9

    #1

    What Prop to use with standard setup

    The Geico comes standard with the plastic 1.6 in x 2,5 in prop. What is a good replacement prop to use?
  • GatorsFan
    Member
    • Aug 2012
    • 34

    #2
    you may want to look at the prop that is made for the mystic 29

    Comment

    • dana
      Banned
      • Mar 2010
      • 3573

      #3
      X642 is same prop only beryllium copper

      Comment

      • martin
        Fast Electric Addict!
        • Aug 2010
        • 2887

        #4
        The x642 has 2.64" pitch, the Proboat props either in plastic or stainless have 2.5" pitch.

        Comment

        • stadiumyamaha
          Fast Electric Addict!
          • Apr 2011
          • 1284

          #5
          X642 is a good prop for the stock setup.
          white geico w/2200kv 3674 leopard 53.5mph 4s2p, geico w/ 1800kv outrunner 52mph on 4s2p, genesis w/2200kv castle 53.8 on 4s2p, impulse 31 w/2200kv castle, stock p1 and ul-1

          Comment

          • dana
            Banned
            • Mar 2010
            • 3573

            #6
            Ok so there is .14 difference... Which is almost nothing. For upgrade use x642

            Comment

            • Gary Cape Town
              Junior Member
              • Mar 2011
              • 9

              #7
              Thanks, ordering X642 prop

              Comment

              • Diesel6401
                Memento Vivere
                • Oct 2009
                • 4204

                #8
                I liked the grim 42x55 the most on my MG. The Hull seems to like less pitch. A s220 might not be a bad choice either, but watch the temps .

                I would run a s215 on the stock motor seaking 120 and 5s for a good cheap killer setup. :)

                Make sure you replace the stock micro 3.5mm bullets with some 5.5mm and dump the deans for 5.5mm or ec5. The increase in amp draw from the x642 will cause issues in the stock connectors.

                Samsung Galaxy III via Tapatalk
                - Diesel's Youtube
                - Diesel's Fleet
                "It is easier to be wise for others than for ourselves"

                Comment

                Working...