battery holder help and question

[jnut06]

I was wondering if anybody has made battery holders, or has any ideas for some. i was using what they gave but sticking the battery on the velcrow ripped the holder off. i feel that there has to be someone out there that can help, please show links or pictures i really appreciate it thanks.

[ManuelW]

Here a few nice battery holders from Switzerland:

http://www.hpr-powerboats.com/products/hpr-135/

They are CNC cut but you could cut/file out also something similar of a 2-3mm thick GFK sheet. Depending on the hull you want to use it and how many cells you want to fix.

regards,
Manuel

[BoyZie]

You can get some from Steven look here http://www.offshoreelectrics.com/pro...Hyperion+G3+Ex

[skyhighdiver]

Just put them back in and use exopy to glue them down good and you will have no more problems . I run Turnigy nano-tech 5000mah 4S 65~130C Lipo Pack velcro to trays many high speed flips and all ok
The just did a crappy job of attaching them on all the boats from factory

[CoreyM]

Do you recommend a apoxy?

[skyhighdiver]

I use 5 minute epoxy that pre mixs in the tube as ou push out no mixing that way has held up great

Do you recommend a apoxy?

[CoreyM]

So should I be putting a piece of Velcro onto the battery tray and one on the battery to keep the battery held down or should I use Velcro loop straps to hold the battery down after I re apoxy the trays back into the hull? I got my boat used so I'm not sure how they are installed stock. Thanks